DOWNLOAD Alcatel onetouch POP (5025e) unlock +backup cm2

[henryCs]

baka mayron may kailangan po nito ito..sana po makatulong

Operation : Read Flash [ v1.54 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513732534D42008F1D6A8FA28F
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMS27
[eMMC] : FLASH_CID : 150100513732534D42008F1D6A8FA28F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBFEA07F4D33054A86EEC43162A7C8A7A
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : TCL
ProdName  : 5025E
ProdModel : 5025E
Device    : PIXI3-55
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_JHZ6580.WEG.L_P60

[Read Ok] : preloader_pixi3_55.bin
[Read Ok] : lk.bin
[Read Ok] : logo.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / pixi3_55 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2131 MiB
Scatter saved to : D:\fashfile\mtk cm2\New folder\MT6580__TCL__5025E__PIXI3-55__5.1__ALPS.L1.MP6.V2_JHZ6580.WEG.L_P60\

All done!

Done!
Elapsed: 00:09:13
Reconnect Power/Cable!

Operation : SP Unlock [ v1.54 ]
Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513732534D42008F1D6A8FA28F
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMS27
[eMMC] : FLASH_CID : 150100513732534D42008F1D6A8FA28F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBFEA07F4D33054A86EEC43162A7C8A7A
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


SIM Lock Status : Locked!
Unlocking now ... 
Unlock done!

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

https://drive.google.com/file/d/0ByY...ew?usp=sharing

may password po,pm lang o c tatsulok

 

[alchemist]

nice thread amo salamat po

 

[ronie2809]

u poh ito

 

[ronie2809]

Dead link po ba pa up naman

 

[BEARD]

paupdate po ng link sir salamat po

 

[gsmharabas]

paupdate po ng link sir salamat po