Alcatel OT-5036A Unlocked in Seconds via NCKbox

[joggaboy]

Steps...
1. Power off the Fone..
2. Open NCK BOX Android MTK Module v1.8.6.3 with box connected
3. Goto with egg nga po...!!!!
este... Goto Unlocking Tab..
4. Select correct model...
5. Click Direct Unlock.. and connect fone to usb...
Singil Mode...


Logs:

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.3
Selected phone: OT-5036
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM158)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35575a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35575A4D : 0000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9480000 [3.645 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM157)
Block Size: 512
MODEL FROM PROINFO: 5036A-2ASAPH1
SECRO FROM PROINFO: X4F0SN01AN00
IMEI marker was found in nvram

OTP ADRESS: 0xffff0200

OTP IMEI[1]: 013822005011962
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 2154939903
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

Screen Shot: