What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Anong Model ba ang phone nato help.

JerbyGSM1988

JerbyGSM1988

Member
Joined
Aug 25, 2015
Messages
71
Reaction score
1
Points
1
Location
Bicol
Mga Paps,pa tulong nman kung anong Model ang unit nato oh di ko kasi makita kasi
dead itong unit na dinala sa akin ni tumer.

Chipset nya; MT6580

ito pic.
[
2lsfxwi.jpg

cY7KCZA.jpg

r7uqes.jpg


baka po may tested na firmware kayo nito sa mga nkaencounter na po nito
pa share nman po.ty

br.
____________________________
JerbyGSM​
 
tama boss sa cm2 mo tirahin para makita kong anong model yan
 
mas mabilis malaman sa antsoftwr boss try mo malalaman mo name ng phone
 
cm2 read info sampol flare s3 octa

Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 15010051375853414201127BE6C222E9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 15010051375853414201127BE6C222E9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xB013BFFFBD758C5B343D48824DEE3092
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Cherry Mobile
ProdName : X330
ProdModel : X330
Device : FlareS3
AndroidVer: 4.4.4
MTKxCPU : MT6592
MTKxPRJ : Flare_S3_Octacore_X330_V05_20150213

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
 
RAIEZ1991 said:
read info mu sa cm2 mkkita mu model nyan
Click to expand...






Wait for phone...
Phone found! [ 24 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 3401004D4855313142002000A031338F
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:02
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Brom Init not done
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 3401004D4855313142002000A031338F
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!


boot error po cya pag info ko sa cm2.

hindi rin ako mka flash kasi ko alam kung anong unit ito.​
 
ant software 8.

Code: 
> Reading Device Info... done.
---------------------------------------------------------------------
 - Model  :  MotoG3
 - Name   :  osprey_retus
 - Manufacturer  :  motorola
 - Build ID  :  MPIS24.65-25.1-14
 - Version  :  6.0 > MARSHMALLOW
 - Kernel Version  :  3.10.
 - Board  :  msm8916
 - Display ID  :  MPIS24.65-25.1-14
 - Chipset       :  osprey_umts
 - CPU ABI       :  armeabi-v7a
 - Baseband  :  M8916_2020629.41.03.21.51R OSPREY_RETUSA_AWS_CUST
---------------------------------------------------------------------
 - Processor   :   ARMv7 Processor rev 0 (v7l)
 - Hardware    :   MSM8916
---------------------------------------------------------------------
 - Serial No.  :  ZY22242VXK
---------------------------------------------------------------------
 - UP TIME: 1 DAY, 23:57:55, IDLE TIME: 1 DAY, 03:32:18, SLEEP TIME: 1 DAY, 16:14:19
---------------------------------------------------------------------
 - CURRENT BATTERY SERVICE STATE:

  AC POWERED: FALSE

  USB POWERED: TRUE

  WIRELESS POWERED: FALSE

  STATUS: 2

  HEALTH: 2

  PRESENT: TRUE

  LEVEL: 82

  SCALE: 100

  VOLTAGE: 4172

  TEMPERATURE: 391

  TECHNOLOGY: LI-ION

---------------------------------------------------------------------
> All done.

cellphone ko yan
 
Kahit i-read info mo yan kong naflash na sa maling firmware maling info nadin ang lalabas kasi mling preloader etc ...
 
johnboo said:
Kahit i-read info mo yan kong naflash na sa maling firmware maling info nadin ang lalabas kasi mling preloader etc ...
Click to expand...

nko sabi ni tumer galing daw to sa ibang shop nagdownload lang daw cya bigla namatay unit nya at program daw sa kabila still dead parin hindi kona kasi ma info sa cm2.​
 
Kong my hawak kang orig backup my chance pa mabuhay yan kaso kong napunta sayo yan na gnyan na flash na sa maling firmware wala na din masusunog lng kilay mo kakahanap ng paraan .. Magndang gawin mo jan boss rto mo nalang po ..
 
ANG ARAL JAN WAG BASTA FLASH NG FLASH ... CHECK MO CONDITION NG UNIT KO MKAKAYA PANG IFLASH NG PAULIT ULIT .. DAHIL GALING NA SA IBANG SHOP NA NAGALAW NA NILA ANG FIRMWARE SA LOOB OR KAHIT BACK WALA NO CHANCE LALO NA SA ITSURA NG UNIT MUKHANG PAHIRAPAN NA TLGA .. "just saying"
 
You must log in or register to reply here.
Back
Top