ASUS X00BD ZenFone GO FRP Lock Done in CM2 Qualcomm module

[Jeltech]

ASUS X00BD ZenFone GO FRP Lock Done in CM2 Qualcomm module

Open Chinese Miracle II ( QLM Module , ver1.16 )
Click Service Tab then Select Full Wipe (User/Cache/FRP) and tick Format FS / Reset Settings
Connect the phone to the PC (Phone must be Turned Off) while holding Vol + and Vol -
antayin lang mavibrate then istalling driver
then after detect wait untill finish...

done...
for reference only

 

[ZOCHRALSKI]

TESTED

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 0CB7E33B
ID_BLOCK_E : 00010001
ID_BLOCK_L : DBEB2274BA3BCAA004686B5FF4B1A869
ID_BLOCK_L : ADFA22641EDF6A9BED2D4CDF7EFE62D5
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Remove FRP
Reset Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!