Problem Hang Logo only
Solution: Flash via asus Flash tool
Files Needed:
Intel USB Driver (Download)(Optional) if you already install driver skip this
https://www.asus.com/in/Phone/ZenFone_C_ZC451CG/HelpDesk_Download/
Pleas Select OS - select Android just download driver then install
ASUS Flashtool v1.0.0.11 (Download)
ASUS Zenfone C ROM (Download)
Steps:
1. Get your Zenfone C to boot into fastboot mode (Power button + Volume down)
2. Connect usb cable Zenfone C to your PC
3. Now, open ASUS Flash Tool :- ASUS Flash tool v1.0.0.11 It should detect your phone with serial number
4. Select your phone model ZC451CG
5. Click box icon and browse for the signed zip image file you downloaded earlier.
6. Select your device on the ASUS flash Tool by clicking on the serial number
7. Select the device on the ASUS Flash Tool Click on the green start button. wait until done
setup phone until menu
oopps merong problema not charging see images
hanap ulit ng flash file habang nag download try ko sa system update software
ayon after install system update then automatic restart nag charge na
Solution: Flash via asus Flash tool
Files Needed:
Intel USB Driver (Download)(Optional) if you already install driver skip this
https://www.asus.com/in/Phone/ZenFone_C_ZC451CG/HelpDesk_Download/
Pleas Select OS - select Android just download driver then install
ASUS Flashtool v1.0.0.11 (Download)
ASUS Zenfone C ROM (Download)
Steps:
1. Get your Zenfone C to boot into fastboot mode (Power button + Volume down)
2. Connect usb cable Zenfone C to your PC
3. Now, open ASUS Flash Tool :- ASUS Flash tool v1.0.0.11 It should detect your phone with serial number
4. Select your phone model ZC451CG
5. Click box icon and browse for the signed zip image file you downloaded earlier.
6. Select your device on the ASUS flash Tool by clicking on the serial number
7. Select the device on the ASUS Flash Tool Click on the green start button. wait until done
setup phone until menu
oopps merong problema not charging see images
hanap ulit ng flash file habang nag download try ko sa system update software
ayon after install system update then automatic restart nag charge na
but before pa sa system update open ko unit baka may cold solder lang pero solder ko paring baka sakaling
so deside to update system matagal pa kasi ang firmware, ayon nag ok