AURII FORCE PLUS FRP Gone In Second By Cm2MTK v1.58

[ZOCHRALSKI]

AURII FORCE PLUS FRP

Procedure :

1. Open Cm2MTK v1.58
2. Settings / CPU/Platform / workmode
3. Select SP:Auto
4. Go To Service/Full Factory reset (ALL) / FRP (RESET PROTECTION)
5. Format / Reset Settings
6. Use Data Cable
7. Insert the cable to your device/ dont use the volume / insert directly the cable
8. Wait until it finish
9. Money is in your Hand

Info

Scatter Load Ok , BaseBand : MT6580 , Project : wc27bf , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : FIREFLY_MOBILE
Device Model : FORCE_PLUS
Device CPU : MT6580
Device IntName : FORCE_PLUS
Device Version : 7.0
Device Compile : 7/15/2017 12:05:29 PM
Device Project : alps-mp-n0.mp2-V1_vz6580.weg.i.n_P65
Device ExtInfo : FORCE_PLUS
Ready to Flash!

FRP RESET

Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E20100000291394FB
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100000291394FB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x000000039A000000
[eMMC] : FLASH_UCP : 14752 MiB [eMMC 16 GiB]
DEV RID : 0x963C61FD0DD68F1507337311E8C3B115
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

Salamat sa Pag view

 

[ZOCHRALSKI]

Feedback sa sarili kung post


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E20100000D582149F
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E20100000D582149F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x000000039A000000
[eMMC] : FLASH_UCP : 14752 MiB [eMMC 16 GiB]
DEV RID : 0x963C61FDD217B57B7C331630C9AD3C5B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!