- Joined
- Nov 22, 2014
- Messages
- 1,359
- Reaction score
- 10
- Points
- 181
tutorial will guide you on how to use BM622m Toolkit By LAVABOY v.2.04.04
this wimax tools can be use for the following:
Features:
Sipport Model:
HOW TO CHANGE MAC?
Step 1: Download bm622m Toolkit by LAVABOY v.2.04.04 LAVABOY
Step 2: Run the application and wait to read your current settings
Step 3: Key in your new Mac Address in new settings panel, set your best Frequency you can find globe
frequency here
and set the domain for your Mac Address to be use..
Step 4: Click Set done!!!
Note: For the Mac address even no colon, theres no problem on that,
the tool will automatically adjust this for you.
This WIMAX GUI will NOT reflect the changes until after reboot of the modem
HOW TO SNIPE MAC?
SUPPORTED SERIES (OLD/NEW ALL)
NOTE: For Shareware versions, MAC sniping will automatically Stop
Once 3 live macs are found. kindly reload / input a new MAC range after the tool stops..
INCREMENT / DECREMENT METHOD
Step 1: choose INCREMENT or DECREMENT
Step 2: Input MAC RANGE
------> (for new series 24,e8,c8,etc LAST HEXADECIMAL VALUE SHOULD BE 0,4,8,C)
Step 3: Input Inc,/ Dec. Value
----> ( FOR NEW SERIES ADVISABLE TO SET AT 4)
Step 4: Set the numbers of retries(select option according to your reference)
-------> Higher Value: increased reliability of LIVE MAC sniped, but it will increase the sniping time
-------> Lower Value: decreased reliability of LIVE MAC sniped, but it will decrease the sniping time (faster)
Step 5: Select Test option (select option according to your reference)
--------> Ping: High speed detection of LIVE MACs pero low reliability of MACs sniped
--------> Download 1mb file, increace reliabilty of LIVE MACs sniped, increace total MAC sniping time
---------> Basically the bigger DL test file it can sure you have LIVE MAC you SNIPED,..
Step 6: Click Snipe Now!!! Done.. BOOM PANES nose bleed!!!!=))=))=))
this wimax tools can be use for the following:
Features:
- Wimax Mac Address Change
- Mac Sniper or Mac Tester
Sipport Model:
- BM622m 2012-2013
HOW TO CHANGE MAC?
Step 1: Download bm622m Toolkit by LAVABOY v.2.04.04 LAVABOY
Step 2: Run the application and wait to read your current settings
Step 3: Key in your new Mac Address in new settings panel, set your best Frequency you can find globe
frequency here
Step 4: Click Set done!!!
Note: For the Mac address even no colon, theres no problem on that,
the tool will automatically adjust this for you.
This WIMAX GUI will NOT reflect the changes until after reboot of the modem
HOW TO SNIPE MAC?
SUPPORTED SERIES (OLD/NEW ALL)
NOTE: For Shareware versions, MAC sniping will automatically Stop
Once 3 live macs are found. kindly reload / input a new MAC range after the tool stops..
INCREMENT / DECREMENT METHOD
Step 1: choose INCREMENT or DECREMENT
Step 2: Input MAC RANGE
------> (for new series 24,e8,c8,etc LAST HEXADECIMAL VALUE SHOULD BE 0,4,8,C)
Step 3: Input Inc,/ Dec. Value
----> ( FOR NEW SERIES ADVISABLE TO SET AT 4)
Step 4: Set the numbers of retries(select option according to your reference)
-------> Higher Value: increased reliability of LIVE MAC sniped, but it will increase the sniping time
-------> Lower Value: decreased reliability of LIVE MAC sniped, but it will decrease the sniping time (faster)
Step 5: Select Test option (select option according to your reference)
--------> Ping: High speed detection of LIVE MACs pero low reliability of MACs sniped
--------> Download 1mb file, increace reliabilty of LIVE MACs sniped, increace total MAC sniping time
---------> Basically the bigger DL test file it can sure you have LIVE MAC you SNIPED,..
Step 6: Click Snipe Now!!! Done.. BOOM PANES nose bleed!!!!=))=))=))
