S
Scottish_Man
Anonymous
wala kasi ako makita khit san maghanap ng C3312R,kya try ko si C3312 FIRMWIRE
kahit sa google wala ako makita,,di ako makadl sa support ala naman ako box
DL FLASHER>>http://www.4shared.com/rar/IMugpHdF/C3312DDLC5_BIN.html?cau2=403tNull&ua=WINDOWS
DL FLASHER>>http://www.4shared.com/get/rhGsq0-_ba/rex_60_flasher.html
Open si flasher
- Turn your Samsung C3312 off, And take out its battery, SIM cards, And memory card.
- From the flasher folder run FlashTool_E2.exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.
- The selecting of firmware files must be in the below order:
- C3312xxxxx_psi.fls
- C3312xxxxx_slb.fls
- C3312xxxxx_BSY.fls
- C3312xxxxx_CDS.fls
- C3312Oxxxx_CSC.dffs
dapat yan ang pagkakasunod sunod ng file
- Now Check these settings:
Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.
tuloy na tayo sa flashing
1- With the phone's battery in, Press Volume Down key then connect the USB cable to it.
2- With the phone's battery in, Press Home key then connect the USB cable to it.
3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.
ito po ung logs
working sana makatulong sa inyo
kahit sa google wala ako makita,,di ako makadl sa support ala naman ako box
DL FLASHER>>http://www.4shared.com/rar/IMugpHdF/C3312DDLC5_BIN.html?cau2=403tNull&ua=WINDOWS
DL FLASHER>>http://www.4shared.com/get/rhGsq0-_ba/rex_60_flasher.html
Open si flasher
- Turn your Samsung C3312 off, And take out its battery, SIM cards, And memory card.
- From the flasher folder run FlashTool_E2.exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.
- The selecting of firmware files must be in the below order:
- C3312xxxxx_psi.fls
- C3312xxxxx_slb.fls
- C3312xxxxx_BSY.fls
- C3312xxxxx_CDS.fls
- C3312Oxxxx_CSC.dffs
dapat yan ang pagkakasunod sunod ng file
- Now Check these settings:
Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver.
tuloy na tayo sa flashing
1- With the phone's battery in, Press Volume Down key then connect the USB cable to it.
2- With the phone's battery in, Press Home key then connect the USB cable to it.
3- Connect the USB cable to phone without battery, After it is detected you can insert the battery.
ito po ung logs
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 1 min 5 sec.
Start downloading item 'CODE:CATFISH.fls'' from file 'C:\Documents and Settings\SUPERDUUPPER\My Documents\Downloads\Compressed\C3312DDLC5_BIN\C331 2DDLC5_CDS.fls''.
Sending sec-pack.
Load region 0
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 1062 msec.
Start downloading item 'CUST:temp_GT-C3312_ODD.dffs'' from file 'C:\Documents and Settings\SUPERDUUPPER\My Documents\Downloads\Compressed\C3312DDLC5_BIN\C331 2ODDLC3_CSC.dffs''.
Sending sec-pack.
Load region 0
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 1 min 2 sec.
Total time was 2 min 23 sec.
Channel 1 is succesfully closed.
working sana makatulong sa inyo