Error code 5B00 on Canon IP2700 printer PDFPrintE-mail
ip2770The waste ink counter is full, you need to reset it.
The waste tank counter is full. We will need to reset the printer. Download the resetter and follow this procedure.
Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Then Press Resume button 5 times then let both buttons go.
The Alternate Blinking error is gone: the printer is in Service Mode state.
Extract the resetter and double click "servicetool.exe"
Click Reload Button and you will get a new USB port.
Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
Then press "EEPROM" button and the printer will print some text, after that click OK
Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.
Done.
Hope it helps. Thank you!
ip2770The waste ink counter is full, you need to reset it.
The waste tank counter is full. We will need to reset the printer. Download the resetter and follow this procedure.
Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Then Press Resume button 5 times then let both buttons go.
The Alternate Blinking error is gone: the printer is in Service Mode state.
Extract the resetter and double click "servicetool.exe"
Click Reload Button and you will get a new USB port.
Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
Then press "EEPROM" button and the printer will print some text, after that click OK
Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.
Done.
Hope it helps. Thank you!
Last edited by a moderator: