HELP ME Can't init device, Reason: CARD Ready Timeout Error

[intoy]

Z3X EasyJtag Software ver. 3.6.2.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0F00801C868339E3, ,FW Ver.: 01.63
CMD Pullup Level:1825 mV
CMD Active Level:2371 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
Can't init device, Reason: CARD Ready Timeout Error
Done.

 

[Gian Lee]

same error here sir.baguhan lang po