What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

cheerymobile superion radar invalid imei

P

prince_dave13

Registered
Joined
Mar 5, 2015
Messages
103
Reaction score
0
Points
1
Location
Zamboanga
mga boss me problema ako saunit nato kung donload only success po xa pag format+download ito nalabas
orp6a9M.jpg


anu po kaya error.......invalid imei po kc to inulit ko lang flash kc ayaw gumana nito

http://www.ant.ph/showthread.php?t=34263&highlight=superion+radar+imei

sinundan ko naman po ang tinuro pero ivalid parin kaya try ko format+downlaod pero error po
 
iflash mo boss sa download only.. then revive IMEI to MTK Droid tools HERE
 
yan din ginawa ko boss kanina ko pa maga na DL yung mtk tools sabi sa tools rebuild succes after reboot pero pag reboot same parin invalid
 
ok nasubukan mo na ba boss mag palit ng ibang firmware?
 
download here ----> superoin radar
password:cmsuperionradar

post result boss.. good luck!!!
 
Last edited by a moderator:
may volcano kb boss? try mo irebuild ang IMEI...
 
PROCEDURE: extract ang mtk_tools
paslak ang cp then piliin yung IMEI/NVRAM then replace imei.
 
ikaw gali na rame tingala man ko kilala ka sakon nagawa ko na yan sinasabi mo ilang bese ko na try kanina pang maga pa olit olit na ginagawa na clear flash ko xa same parin
 
pag invalid imei at hnd kaya ng mtkdroid tools
perfect po jan ang mobile uncle tools

mobile uncle tools procedure (MTK phone)

download mobile uncle apk from google play store and open it
1- Go to Engineer mode in mobile Uncle tool
2- Select Engineer mode[MTK]
3- Go to CDS information
4- Select Radio Information

Here you can see Phone1 and Phone2, in that select phone2, because most of the Chinese clone phone the 1st Sim which is a 3G will work perfectly. Only the problem happens when we insert the second sim. If you check you can see the IMEI of 1st sim will start with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is why the second sim is not able to register to the network, because its not in international formatted IMEI. So usually we need to change the IMEI of phone 2.

5- Select the phone 2

Here you can see a command line with “AT+â€￾. Now just add this command to it
AT+EGMR=1,10,â€￾15 digit YOUR NEW IMEI NOâ€￾
And press “send at commandâ€￾ button. [ if you want to change the the phone 1 IMEI AT+EGMR=1,7,â€￾NEW IMEI NOâ€￾]

Yes we all done… now you can restart the phone and check the IMEI by pressing *#06#
 
You must log in or register to reply here.
Back
Top