dogtrax2k
Registered
Update ko lang po
CherrMobile Spin 3g+ Done sa tesdted firmware salamat so sa thread ni boss gallerian
ito po yun pasok po http://www.antgsm.com/showthread.php?p=496455#post496455
dalwa po yan isang v.0 at v3 at salamat nadin kay ModTeam AGS
para sa pass
una try ko po yung v3 yung may pass negative nag double yung screen nya after flash
ito po yun complet flash kaso ito resulta
kaya try ko po ulit DL nung isang firmware yung walang pass succes ito po uung link
ito po: Spin 3g+ version 0
flash ulit gamit NCKcrack
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0x12700000
[15]Part: CACHE Begin: 0x156c0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x15dc0000 Len: 0x8dc0000
[17]Part: BMTPOOL Begin: 0xffff0050 Len: 0x0
Offset: 0x1eb80000 Count: 18
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
success....
salamat sa pag view... at ulitin ko po salamat sa thread ni boss
gallerian at kay ModTeam AGS para sa pass ang thread po na ito ay update lang po para sa lahat
.... para sa ibang makaka tanagap ng ganto try nyo na po muna yung v0. succes po siya salamat at happy new year sating lahat
CherrMobile Spin 3g+ Done sa tesdted firmware salamat so sa thread ni boss gallerianito po yun pasok po http://www.antgsm.com/showthread.php?p=496455#post496455
dalwa po yan isang v.0 at v3 at salamat nadin kay ModTeam AGS
para sa pass
una try ko po yung v3 yung may pass negative nag double yung screen nya after flash
ito po yun complet flash kaso ito resulta
kaya try ko po ulit DL nung isang firmware yung walang pass succes ito po uung link
ito po: Spin 3g+ version 0
flash ulit gamit NCKcrack
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0x12700000
[15]Part: CACHE Begin: 0x156c0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x15dc0000 Len: 0x8dc0000
[17]Part: BMTPOOL Begin: 0xffff0050 Len: 0x0
Offset: 0x1eb80000 Count: 18
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 224 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
success....
salamat sa pag view... at ulitin ko po salamat sa thread ni boss
gallerian at kay ModTeam AGS para sa pass ang thread po na ito ay update lang po para sa lahat
.... para sa ibang makaka tanagap ng ganto try nyo na po muna yung v0. succes po siya salamat at happy new year sating lahat