Cherry Mobile BURST " DEADBOOT " revive done by Medusa Jtag

[Xeven2nd]

Cherry Mobile BURST " DEADBOOT " revive done by Medusa Jtag

TOOLS:

MEDUSA BOX
USB CABLE CA-101
BOOT FILES DOWNLOAD HERE: Auto Boot 19-12-2013 12_45_09.bin

PROCEDURE:

- Soldered pinout then connect phone to Box
- Connect phone to pc using CA-101 usb cable

PINOUT USE:

- run MEDUSA software

- click CONNECT

- browse Auto Boot 19-12-2013 12_45_09

- Flashing Progress . . . . . .

Finish

DONE JTAG AND PHONE IS ALIVE BUT HANG ONLY ON BURST LOGO

NOW PROCEED TO FLASHING

- power off phone with battery

- hold volume up then press power
switch on to put in DOWNLOADING MODE

- connect Phone to PC using USB cable CA-101

- Run " Android_AIO_Flasher " download here: Android_AIO_Flasher_1.40

- click RECOVERY on select partition
- click SELECT FILE " a28.img "
- put check ERASE
- then click FLASH

- after Flashing " a28.img " download here: a28.img
- remove phone to PC and remove battery

- now we need atleast 1GB SD card
then copy this file " TeamBURST.Rom.mk.4 " download here : TeamBURST.Rom.mk.4.zip
in SD card root directory

- then put the SD card to power off Phone with battery

- hold volume down then press power to enter recovery mode

- select " install zip from sdcard " then press power switch to select
- select " choose zip from sdcard " then press power switch to select
- select " TeamBURST.Rom.mk.4.zip " press power switch to select
- select " YES - install TeamBURST.Rom.mk.4.zip " press power switch to select

then Follow procedure in Phone screen . . .

and wait till finish Flashing via SD card

FINISH FLASHING VIA SD CARD

Thanks and Credits Goes to my
GSM friends for iDeas , Firmwares and Procedures.

jaded_17
ayhen42
etnad


Br,
Xeven2nd

 

[J-E-R-O-M-E]

salamat po sa share bossing madaling sundan at klaro...