- Joined
- May 23, 2016
- Messages
- 170
share ko lang mga boss cosmos z no power
sabi ng tumer sira lang daw power swicth
pero ng icheck ko totaly dead talaga ang unit pero nadiditect pa nmn ng pc
kaya unang hakbang ko try ko muna iback up ang firmware sa cm2 sucsess naman
pero nung nireflash ko boot error na ayaw magtuloy ng flashing
nakakuha ako ng ibang firmware pero boot error parin
kahit sa spflashtool broom error parin
kaya nag isip ng ibang paraan
sa totoo lang mga boss madalas akong nakaka encounter ng ganitong problema
at base nalang ito sa mga karanasan nating mga totoong tech
eto ginawa ko
reheat at galaw galaw
this ic
next flash ko ulit sya sa sarili nyang back up firmware
sucsess nanaman
nagamot sa sariling laway
firmware here
at xempre password protected yan mga boss alam nyo na gagawin
PM lang for password
makapag dagdag kaalaman sa iba
pag nagustuhan mo tnx button mo
sabi ng tumer sira lang daw power swicth
pero ng icheck ko totaly dead talaga ang unit pero nadiditect pa nmn ng pc
kaya unang hakbang ko try ko muna iback up ang firmware sa cm2 sucsess naman
pero nung nireflash ko boot error na ayaw magtuloy ng flashing
nakakuha ako ng ibang firmware pero boot error parin
kahit sa spflashtool broom error parin
kaya nag isip ng ibang paraan
sa totoo lang mga boss madalas akong nakaka encounter ng ganitong problema
at base nalang ito sa mga karanasan nating mga totoong tech
eto ginawa ko
reheat at galaw galaw
this ic
next flash ko ulit sya sa sarili nyang back up firmware
sucsess nanaman
Code:
Wait for phone...
Phone found! [ 17 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 4B0001153030535575B60C4D8D602D00
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SU
[eMMC] : FLASH_CID : 1501004B555330304D0CB675002D608D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD84B1A9CB1CEA3B8CA48B5BEFD8B6C7B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6589 , Project : MTK6589 , Storage : eMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BL : BatteryLevel : 4176 mV
BL : BatteryLevel Ok
BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002720000-0x00000000CE660000
Flash Pre-Erase Done, time used : 00:00:00
SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_hsimobile89_wet_jb2.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Done!
Use FLN Mode
Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:01:41
Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:35
Update Mirror PMT
Update Done!
Update RomInfo done
Done!
Elapsed: 00:02:42
Reconnect Power/Cable!nagamot sa sariling laway
firmware here
at xempre password protected yan mga boss alam nyo na gagawin
PM lang for password
makapag dagdag kaalaman sa iba
pag nagustuhan mo tnx button mo
