REFERENCE Cherry Mobile flare HD 4 FRP done 10secs.

[nardzky]

Mga bossing share ko lang gawa ko. FRP.

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4001]: S_FT_DA_NO_RESPONSE
Boot Fail.!!!.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[5054]: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;

Boot Fail.!!!.
All done.

kapag may ganito error pasok this TICK ME!!!
tatsulok ang password.
walang masyado procedure na po kasi crack ito. Alam na natin ang gagawin.

Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 11:00:00:00:00:00:00:00
EMMC CID: 13014E51324A39 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM7)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x18c00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

hit like lang po masaya nako.
)))