Cherry mobile flare j2s "hang only" done via cm2 flashing 1st in phil.

[jhames47]

SHARE KO LANG MGA KA-ANT ITONG TANGGAP KUNG
FLARE J2S HANG ONLY

WALA NG LIGOY-LIGOY PA

STOCK ROM LINK
http://download938.mediafire.com/db...__alps-mp-m0.mp1-V2.34_vz6580.weg.i.m_P14.rar





CM2 FLASHING LOG



Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : w325 , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Cherry
Device Model : Flare_J2S
Device CPU : MT6580
Device IntName : Flare_J2S
Device Version : 6.0
Device Compile : 10/31/2016 1:55:20 PM
Device Project : alps-mp-m0.mp1-V2.34_vz6580.weg.i.m_P14
Device ExtInfo : Flare J2S
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004548384345380113FD1E1593C3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8EC8H
[eMMC] : FLASH_CID : 7001004548384345380113FD1E1593C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x27EB228D9C9777D303BEE618450F7B5B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : w325 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3947 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000001C1EE0000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_w325.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:06:03

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:35

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:06:58


UNIT SETUP

SALAMAT AT NAGAWA DIN NAKUHA SA SIPAG AT TIYAGA

BIG BIG CREDIT TO SIR denden16{} PARA SA STOCK ROM
AT KAY MOD impackz{} PARA SA PASSWORD

SANA MAKATULONG PO MGA KA-ANT

MAY PASSWORD PO UNG STOCK ROM
PM SIR denden16 OR STAFF NG ANT






​

 

[JULAY20]

keep on posting boss pa tatsolok ng password po salamat

 

[SNALC15]

nice share boss tnx

 

[mhadz28]

salamat ts

 

[jhames47]

Pahabol pwde po i pm si boss sonny para sa password at ako din

 

[Techedz]

pang CM2 lang ba ito boss wala bang pang spflash?

 

[nikkiboy04]

sir pa try po naka patay aq na unit na ganyan pa pm po ng pass salamat

 

[redamai]

password po salamat

 

[jhames47]

sir pa try po naka patay aq na unit na ganyan pa pm po ng pass salamat

pm send

 

[jhames47]

password po salamat

pm send

 

[Gsm_Bukz_17]

tnx for share i dol keep posting

 

[celtron]

boss pa pm din po nang password

 

[celtron]

pm send

boss flare j2s v2 po ba yan

 

[jeryc]

pa send po pw salamat po

 

[oliver32]

pabulong naman ng pass boss,,tia po.....

 

[cameltoe_36]

pa pm nang password po

 

[Lanz]

congratz boss

 

[cameltoe_36]

boss pa pm nman nang paswword need ko kc salamat

 

[cameltoe_36]

boss password thanks..

 

[cameltoe_36]

boss error po sakin sa verify cache tsaka userdata anu kaya pweding gawin boss

 

[Edzzz11]

gandang gabi boss jhames47 sa spreadtrum lng na detect pro sa Mtk ayw eh pang Mtk pa nman FW mo... syang

 

[mysteriuzo]

boss pabulong po ng password tia.....

 

[JOVANE25]

pang CM2 lang ba ito boss wala bang pang spflash?

kadalasan sir ok lang ang readback ng cm2 pang spflash so pwede yan pang sp_flash sakin lang

 

[FixCom_0822]

sir, pwde pa share ng file mo at password nrin po., mrming slamat

 

[Harold Reyes]

boss pwede pm nang password tnx

 

[Haif]

congrats boss.. pwd po pa pm pw!!

 

[bernie86]

pass po bos more thanz and godblees

 

[jmbongar]

penge po password

 

[jmbongar]

SHARE KO LANG MGA KA-ANT ITONG TANGGAP KUNG
FLARE J2S HANG ONLY

WALA NG LIGOY-LIGOY PA

STOCK ROM LINK
http://download938.mediafire.com/db...__alps-mp-m0.mp1-V2.34_vz6580.weg.i.m_P14.rar





CM2 FLASHING LOG



Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : w325 , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Cherry
Device Model : Flare_J2S
Device CPU : MT6580
Device IntName : Flare_J2S
Device Version : 6.0
Device Compile : 10/31/2016 1:55:20 PM
Device Project : alps-mp-m0.mp1-V2.34_vz6580.weg.i.m_P14
Device ExtInfo : Flare J2S
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004548384345380113FD1E1593C3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8EC8H
[eMMC] : FLASH_CID : 7001004548384345380113FD1E1593C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x27EB228D9C9777D303BEE618450F7B5B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : w325 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3947 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000001C1EE0000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_w325.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:06:03

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:35

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:06:58


UNIT SETUP

SALAMAT AT NAGAWA DIN NAKUHA SA SIPAG AT TIYAGA

BIG BIG CREDIT TO SIR denden16{} PARA SA STOCK ROM
AT KAY MOD impackz{} PARA SA PASSWORD

SANA MAKATULONG PO MGA KA-ANT

MAY PASSWORD PO UNG STOCK ROM
PM SIR denden16 OR STAFF NG ANT






​

penge po password please

 

[alladin]

sana ganyan din kadali ang mga spd chips ng cherry mobile,j2s kasi na spd at j1s ang kukunat e flash...still hang on logo parin

 

[sum_44]

sir need ko password salamat GOD BLESS

 

[halid1234]

pm poe ung password

 

[jhaytherlie]

pa pm po ng password slamat

 

[kraven11]

makihiram lng po ng password.. boss, maraming salamat

 

[jojobuddy]

boss salamat sa sharing..pasilip nmn ako sa tatsulok..need nlng mga boss..

 

[jojobuddy]

pa pm po mga ka ant ng pass nito,,salamat

 

[robel aquino]

Passwor po sir thanks?

 

[robel aquino]

Password po bossing thanks!!!