Cherry Mobile Flare S7 Prime Scatter Backup First sa Tahanan

[GSMKing]

Gamit ko po pang bakcup nito CM2MT2. Sundan lang po sa larawan ang configuration. Tapos press Vol Down key pag saksak para naka BOTROM Mode.

Created by Infinity-Box (c) 2018
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Patch Level : O11019
Display ID : Cherry_Flare_S7_Prime_V03_09182018
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-09-05
Build Time : 1537275809
Product Model : Flare_S7_Prime
Product Brand : Cherry_Mobile
Product Name : Flare_S7_Prime
Product Device : Flare_S7_Prime
Product Manfct : Cherry_Mobile
Product Info : we568b
Product Board : Flare_S7_Prime
Board Platform : mt6580

Operation : Read Firmware [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM33)
[COLOR="Lime"]MODE : BOOTROM[/COLOR]
PORT : 33
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
MODE : 0_base : BASE_v1812 | Manual : Enabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 4503018830314250D19239303B836039
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 8801034550423130303992D13960833B
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1.00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 8801034550423130303992D13960833B
        EMMC: VEN : FORESEE | OEM : 301 | DEV : EPB100
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x1CE100000 [ 7.22 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F7A9B1B0D6D0D6EC1CC6CBCBB6DB70C1

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM34)
MODE : PRELOADER PORT
PORT : 34

Boot done!

Patch Level    : O11019
Display ID     : Cherry_Flare_S7_Prime_V03_09182018
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1537275809
Product Model  : Flare_S7_Prime
Product Brand  : Cherry_Mobile
Product Name   : Flare_S7_Prime
Product Device : Flare_S7_Prime
Product Manfct : Cherry_Mobile
Product Info   : we568b
Product Board  : Flare_S7_Prime
Board Platform : mt6580

MT6580__Cherry_Mobile__Flare_S7_Prime__8.1.0__Cherry_Flare_S7_Prime_V03_09182018__O11019__we568b

Read : preloader.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 70%
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 24%
Read : cache.img
Read : userdata.img

FW Size  : 1.26 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : D:\GSM NEW\MT6580__Cherry_Mobile__Flare_S7_Prime__8.1.0__Cherry_Flare_S7_Prime_V03_09182018__O11019__we568b\

Done!
Elapsed: 00:07:33

Download Link

pass-49PW6JYQ4QCY32DP

​

br,
GSMKing

 

[dflash]

salamat bos pagshare mo...