What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Cherry Mobile J3 Lite Pattern Done via CM2 + Secureboot

GSMKing

Registered
Joined
Apr 8, 2016
Messages
302
Reaction score
120
Points
31
History: Pareformat daw kasi may pattern kaya presyohan ko ng sakto reformat pala eh.
Taken: May na encounter na ko nito kaso frp gamit ko nck crack kaya naisipan sa cm2 para maiba nman hehe at ayun.

Download Link https://mega.nz/#!AFhQmIqC!tb7TZ4N_ZSa24P7NVLG_JFqVMBANLkHNwsSsD3kaanc

Steps:
1. Copy lang secure boot doon sa lagayan sa cm2. Backup nyo muna yung old or replace nyo kaya bahala.
2. Piliin yung Reset userlock ayaw magan sa Read pattern eh.
3. Done.

Code:
Operation : Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc] [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642021E178932534AF
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642021E178932534AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0x60C20F85E056F832E9FC891B877C2402
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

LSSDB Ok!
LSSWL Ok!
LSSSH Ok!
LSSNP Ok!
LSSNG Ok!
Security Settings : Clear Ok!

[Info] : That feature NOT RESET "PRIVACY PASSWORD LOCK"! Use separate button!
[Info] : That feature NOT RESET "FRP/GoogleLOCK"! Use separate "FRP" reset!
[Info] : If phone stuck on "Logo" : 
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!

attachment.php


attachment.php


attachment.php

Note: Walang pass yung secure boot, para sa lahat yan. Di nman mg aasakya pera mga tektumer para bili cm2.

br,
GSMKing
 
Last edited by a moderator:
Back
Top