cherry mobile snap sa mahirap ma detect

[soLVer_tech]

<article>

1 detect pinout press vol-up and down para lumabas ang usb driver then i stall
eto yung driver http://www.4shared.com/rar/iYd9-Jsa/USB-Spreadtrum.html
yan yung nag work sa akin

2 built-in boot_14(6820/8810)

3 pwede na format

4 then run

5 pag sa detect kung maaari wag bitawag ang vol-up and down hangang di tumutuloy

kaya ang secret ay nasa vol-up and down
ganito lumalabas pag bumibitaw

Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2013-12-24 10:49:45 AM >>Setting...
2013-12-24 10:49:57 AM >>Set the Pinouts failed,please reconnect and try again!

kailangan antahin ay ganito

Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
2013-12-24 4:12:31 PM >>Setting...
2013-12-24 4:12:36 PM >>Find USB device:SCI USB2Serial (COM7), (VID_1782&PID_4D00)
2013-12-24 4:12:36 PM >>Pinouts setting complete!

then mag format na sya

2013-12-24 5:24:25 PM >>Internal version: SPRD3
2013-12-24 5:24:25 PM >>Boot downloading...
2013-12-24 5:24:26 PM >>Start boot please wait a moment....
2013-12-24 5:24:28 PM >>Spreadtrum Boot Block version 1.1
2013-12-24 5:24:29 PM >>Boot downloading...
2013-12-24 5:24:30 PM >>Flash ID: 00EC00BC01554800
2013-12-24 5:24:30 PM >>Flash Type:[SAMSUNG] K9F4G08/K9K4G08
2013-12-24 5:24:30 PM >>FLASH LEN:0x20000000
2013-12-24 5:24:31 PM >>Start analysis mobile data...
2013-12-24 5:24:37 PM >>please wait.....
2013-12-24 5:24:37 PM >>The phone is setting back to Factory.:-*
​

</article>