Y
yow
Anonymous
Cherry Mobile Spark TV Flashing, TMPA, Remove Pattern Lock
This Tutorial is for your Cherry Mobile Spark TV version 1 only, I REPEAT VERSION 1 ONLY, I REPEAT VERSION 1 ONLY. Do not attempt to flash your Cherry Mobile Version 2, your phone might turn unusable or you capacitive buttons will not work.
First you will need to download several files.
Here is the first one. This file contains the PAC file and the flasher (research download)
https://www.sendspace.com/file/3h92x1
And Here is the last one (USB Driver)
http://www.uploadmb.com/dw.php?id=1404378785
Both files are very important, if you don't have the PAC file and the flasher you cannot flash the phone. Same as with the DRIVER, if you don't have the driver research download(flasher) cannot the detect it for you. So download both and let's proceed.
Things need to consider when flashing.
1. You should have an extra battery, or if you can charge your battery thru your phone then charge it atleast 50%.
2. Double check your Micro USB Cable.
Let's proceed to flashing. Check the pictures for procedure
Click on Load Packet, you can see in the picture that it is the first button.
Then in the "Main Page", UNCHECK that is shown in the picture
This one is in "Calibration" section, UNCHECK all
then press "OK"
Proceed pressing the "Play" button, then connect your to your PC. This should detect the phone and continue Flashing. If it is not detecting the phone, it means the driver is not properly installed.
Just wait for it to finish and VOILA your phone is back on its original state.
If your problem is you forgot your google account and your forgot it, this is also known as TMPA. You can also flash it via research download, i've tried it on VERSION 1 of SPARK TV. VERSION 1 Only OK.
Check the picture on the second picture of flashing. Check only the following
✓FDL1
✓FDL2
✓UserData
and then uncheck all in "Calibration" page. Press ok then lastly press on the Play button. Just wait for it to finish.
I hope this tutorial helps. ^_^
This Tutorial is for your Cherry Mobile Spark TV version 1 only, I REPEAT VERSION 1 ONLY, I REPEAT VERSION 1 ONLY. Do not attempt to flash your Cherry Mobile Version 2, your phone might turn unusable or you capacitive buttons will not work.
First you will need to download several files.
Here is the first one. This file contains the PAC file and the flasher (research download)
https://www.sendspace.com/file/3h92x1
And Here is the last one (USB Driver)
http://www.uploadmb.com/dw.php?id=1404378785
Both files are very important, if you don't have the PAC file and the flasher you cannot flash the phone. Same as with the DRIVER, if you don't have the driver research download(flasher) cannot the detect it for you. So download both and let's proceed.
Things need to consider when flashing.
1. You should have an extra battery, or if you can charge your battery thru your phone then charge it atleast 50%.
2. Double check your Micro USB Cable.
Let's proceed to flashing. Check the pictures for procedure
Click on Load Packet, you can see in the picture that it is the first button.
Then in the "Main Page", UNCHECK that is shown in the picture
This one is in "Calibration" section, UNCHECK all
then press "OK"
Proceed pressing the "Play" button, then connect your to your PC. This should detect the phone and continue Flashing. If it is not detecting the phone, it means the driver is not properly installed.
Just wait for it to finish and VOILA your phone is back on its original state.
If your problem is you forgot your google account and your forgot it, this is also known as TMPA. You can also flash it via research download, i've tried it on VERSION 1 of SPARK TV. VERSION 1 Only OK.
Check the picture on the second picture of flashing. Check only the following
✓FDL1
✓FDL2
✓UserData
and then uncheck all in "Calibration" page. Press ok then lastly press on the Play button. Just wait for it to finish.
I hope this tutorial helps. ^_^
