PinoyTechnician
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Cherry Mobile Superion Probe Encryption Unsuccessful Help..
- Thread starter froi
- Start date
froi
Premium Account
up ko lang mga ka ant pending parin ala paring firmware nito...
princejay
Registered
same problem tayo boss..........needed ko din firmware nito.
Chimera Tool
Registered
boss kausapin mo tomer mo 50-50 ang labanan ninyo hirap yan kc emmc yan cra
try mo eto boss
Tutorials on Cherry Mobile Superion Probe flash via ADB Sideload.
Note: For Cherry Mobile Superion Probe that can access Stock Recovery System only not working or tried on deadboot/ hardbrick unit.
Lets Begin!!!
By Using Update via SDCARD - Stock Recovery
Step 1: Download Superion Probe Stock Firmware.
https://mega.co.nz/#!uBcUWDgb!RiWTRdiHM5Oh0x4kLcLX9u4TsmRxHCh6mVTjMQ_2PGE
Step 2: Copy and save Superion Probe Stock Firmware on your sdcard, then rename it as "update.zip".
Step 3: Make sure your battery is above 50%.
Step 4: Put Tablet on Stock Recovery Mode by pressing “Power Button and Volume Up†Together.
Step 5: Select "Apply Update via SDCard or External SDCard and Select "update.zip".
Step 6: Wait until it done, after that reboot your tablet and wait up to 10 minutes to boot up.Then viola you already recover your superion probe.
By Using ADB Sideload Update
If you encounter sdcard can’t mount or other errors , you may also use this steps.
Step 1: Download “PdaNetA4180†and “Minimal_adb_fastboot_v1.1.3â€.
https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
http://pdanet.co/a/
Step 2: Install “PdaNetA4180†and “Minimal_adb_fastboot_v1.1.3â€..
Step 3: Download Superion Probe Firware and rename it as “probe.zipâ€
https://mega.co.nz/#!uBcUWDgb!RiWTRdiHM5Oh0x4kLcLX9u4TsmRxHCh6mVTjMQ_2PGE
Step 4: Copy the “probe.zip†on this location “C:\Program Files\Minimal ADB and Fastbootâ€.
Step 5: Put Tablet on Stock Recovery Mode by pressing “Power Button and Volume Up†Together.
Step 6: While on “Recovery Modeâ€. Select “Apply Update From ADBâ€.
Step 7: Open “Minimal ADB and Fastboot†Software.
Step 8: Your device must be detected or go to computer device manager and check for ADB Devices Drive Installed. Or on “Minimal ADB and Fastboot†Software Console Type: adb devices
- if your device already detected proceed on next step.
Step 9: On “Minimal ADB and Fastboot†Software Console Type: adb sideload probe.zip
Step 10: Wait until, Firmware update gets 100 %. After that check your tablet screen you must see firmware updating, wait until it is finished. When firmware update done, “Select Reboot Systemâ€.
After that wait 5 to 10 minutes to boot up your tablet, then viola you already flash your probe on stock v7 firmware.
Credits to:
ariesbaluyot (that’s me)
xda team
gsmsandwich family
probe facebookpage
adroidquestions.org
linuxquestions.org