cherymobile flare j3s flash using cm2spd2

[mmssanmiguel]

Card found : 39EA192D , v0138

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!

Operation : Identify [ v2.03 ]

BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wai for device ...
vice Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kic FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!
Device info :
Ptch Level : O11019
Display ID : Cherry_H1580_Flare_J3s_08292018_V05
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
BuildTime : 1535509354
Product Model : Flare J3s
Product Brand : Cherry_Mobile
Product Name : Flare_J3s
Product Device : Flare_J3s
Product Manfct : Cherry_Mobile
Product Info : Flare_J3s
Prduct Board : sp7731e_km10f
Board Platform : sp7731e
Update DataBase ...

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub
UserData : STATE : PLAIN
Done!
Elapsed: 00:01:38


Open : Cherry_H1580_Flare_J3s_11222018_V07.pac

VER : BP_R1.0.0

LEN : 0x5DEA800D

CPU : sp7731e_km10f

VER : Cherry_H1580_Flare_J3s_11222018_V07



Reading package ...

Read package finished!

Patch Level : O11019
Display ID : Cherry_H1580_Flare_J3s_11222018_V07
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-10-05
Build Time : 1543547733
Product Model : Flare J3s
Produt Brand : Cherry_Mobile
Product Name : Flare_J3s
Product Device : Flare_J3s
Product Manfct : Cherry_Mobile
Product Info : Flare_J3s
Product Board : sp7731e_km10f
Board Platform : sp7731e

Operation : Flash Firmware [ v2.03 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : Cherry_H1580_Flare_J3s_11222018_V07.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!
CODE : prodnv.img
ERASE : UBOOT
ERASE : UBOOT_LOG
UBOOT : u-boot-spl-16k-sign.bin
CODE : vbmeta-sign.img
CODE : SC9600_pike2_pubcp_modem.dat
CODE : PIKE2_DM_DSP.bin
CODE : pike2_cm4.bin
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : PM_pike2_cm4.bin
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : userdata.img
CODE : newlogo.bmp
CODE : newlogo.bmp(1)
FSIMG : cache.img
FSIMG : vendor.img
ERASE : W_RUNTIMENV1
ERASE : MISC
CODE : tos-sign.bin
CODE : sml-sign.bin
OOT : u-boot-sign.bin
FSIMG : persist.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:12:43


firrware link : https://www.mediafire.com/file/epa41dng0tl4e1y/Cherry_H1580_Flare_J3s_11222018_V07.zip/file
salamat sa owner ng firware

 

[GEMICHA]

password nito boss

 

[mmssanmiguel]

walang pass. boss

 

[janix]

corrupted boss

 

[iceman03]

tested po sir.

 

[moda]

tested po sir thanks