Cloud Fone Excite Prime 2 Cm2MTK Fresh Unit Back Up 7.0

[khai]

Cloud Fone Excite Prime 2 Cm2MTK Fresh Unit Back Up 7.0​

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_brodhorse..00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019061344742C722A532AF29A6CC
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A522C7CCA634AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xEE22CB439FE7ED638BF18078CBD744C1
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : CloudFone
ProdName : Excite_Prime_2
ProdModel : Excite Prime 2
Device : Excite_Prime_2
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_6737m.35.n_P244

[Read Ok] : preloader_v3961.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / v3961 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3236 MiB
Scatter saved to : C:\Users\RRM Prints\Desktop\MT6737M__CloudFone__Excite_Prime_2__Excite_Prime_2__7.0__alps-mp-n0.mp1-V1.0.2_6737m.35.n_P244\

All done!

Done!
Elapsed: 00:07:02
Reconnect Power/Cable!


​

​

EXCITEPRIME2 FIRMWARE​

password protected use tatsulok para sa password​

paano gamitin si tatsulok?​

ETO OH​

 

[JULAY20]

salamat dito boss laking tolong po yan sa amin

 

[J@me$23â„¢]

salamat po dito..

 

[gsm_cqe]

maraming salamat pO..

 

[yosijoe]

boss update ko lang
=======
1. Power Off , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for ...
found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND : NOT INSTALLED
eMMC : 484A019061344742C622A53251420AE9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC IC initialized
[eMMC] : _VEN : 0x90 , OEM : 014A
[eMMC] : _INF : [HYNIX] , 2a4GB
[eMMC] : _CID : 90014A484247346132A522C6E90A3451
[eMMC] : _BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : _LEN : 0x0000000747C00000
[eMMC] : _UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xA195CACA72F5F263448EA2CCC8C32CEA
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6737 , Project : v3961 , Storage : EMMC
Setting : Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3806 mV
BL : BatteryLevel Ok

[SECURE] : Break by user request


Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!
[/QUOTE]

[SECURE] : Break by user request

need ata talaga nito ng sign image
para ma bootloader bka may naka pag try na nito..