Share kolang another tested flashing gamit si Infinty
tools needed:
Infinity CM2spd
tested flashfile Tested file here
password:
ginerz15 bro
Procedure:
No battery > then hold up button > connect to pc > then put battery to detect > then click Flash
tools needed:
Infinity CM2spd
tested flashfile Tested file here
password:
ginerz15 bro
Procedure:
No battery > then hold up button > connect to pc > then put battery to detect > then click Flash
<aside>
</aside>
Code:
Infinity SC Firmware Detected
FW Size : 317 MiB
Load Ok!
File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Cloudfone
Device Model : G753E
Device CPU : G753E_sp7715ga_7675
Device IntName : G753E
Device Version : 4.4.2
Device Compile : 4/30/2015 1:34:58 PM
Device Project : G753E_FS20150430_V06
Device ExtInfo : G753E
Operation : Flash [ v1.14 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 45 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x16 records
PMTManager : PMT Update Ok!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Write Data ...
Write Data Ok!
Write FSImage : prodnv_b256k.img
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc7715_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Write CodeData : CP2._CP2_WCN_14C_W14.39_Release.bin
Write Data ...
Write Data Ok!
Write CodeData : logo_320x480.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system_b256k.img
Write Data ...
Write Data Ok!
Write FSImage : cache_b256k.img
Write Data ...
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Write FSImage : userdata_b256k.img
Write Data ...
Write Data Ok!
Elapsed: 00:01:50
Reconnect Power/Cable!Click to expand...
Then Smile
