Cloudfone geo 400 LTE HANG ON LOGO DONE BY CM2

[paparodge15]

Cloudfone Geo 400 LTE HANG ON LOGO DONE BY: CM2

ACTION TAKEN AND PROCEDURE:

Operation : Read Flash [ v1.10

1. Open sw Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.10
2. First read and flash muna para safe
3. Then proceed to flash load OR SELECT the infinity_programm or the firmware
4. Click the Flash option or tab
5. Power Off Phone , Remove battery , Insert back
6. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
7. Wait until finish done

para naman sa backup at firmware :

DOWNLOAD HERE

reminders for all may password din yan pm na lang thanks
thanks for viewing guys:-bd:-bd:-bd

 

[JULAY20]

keep posting idol
__________________
soouth cotabato chapter ka ba hali kana

 

[SNALC15]

salamat sa pag share boss

 

[Lans7]

good job bossing

 

[ONYOK2016]

gud am boss,
pa pm po password my tanggap ako ngayon . salamat

 

[TOTO27]

kung offline si ts, gamitin ang POWER of RED TRIANGLE sa paghingi ng password





POWER of RED TRIANGLE

​

 

[revengzpro]

Good morning Mga Boss...salamat sa pag share mo dito...

 

[Jastech]

Thanks sa effort at pagshare ts.

nadagdagan naman ang treasure ng ating colony..:-bd

keep up the good work po..

 

[ANDROID_OS]

ask kolang kay TS kung anung cable ang ginamit dito EDL ba or DIY cable modified ayaw kasi mag detect sa normal usb cable



salamat sa makakasagot ..

 

[paparodge15]

ask kolang kay TS kung anung cable ang ginamit dito EDL ba or DIY cable modified ayaw kasi mag detect sa normal usb cable



salamat sa makakasagot ..

boss ordinary usb cable lang po pero kailngan mo i hold un volume up and down then connect mo un usb tapos may lalabas sa screen na press both power button and volume up para mag connect sya

or check mo un driver para sa qualacom sir good luck

 

[jpyro]

pa pm din ako ng password boss salamat

 

[rainford]

boss pa pm po password salamat

 

[jpyro]

after flashing ganito po sya, paulitulit lang dito naka anim na ata ako, wipe or reboot,
dito lagi ang natatapos

try ko ulit sa ibang firmware ito naman sya

 

[wengweng0411]

Sir pahingi naman po ng password pls. Thanks.

 

[Ferdielux]

salamat sa pgbahagi nito boss... paPm narin ako ng pass nito baka my mpdaan bukas
Tia

 

[pogz27]

sir pabulong ng password nag red triangle na ako
thank in advance:

 

[junpol26]

sir pa pm nman po ng pasword... salamat

 

[junpol26]

pa pm nman ng pas sir .. salam

 

[junpol26]

pa pm nman ng pas sir .. salam

 

[andreivi]

salamat sa firmware boss tested working