WEIRDIODE
Registered
- Joined
- Jun 12, 2014
- Messages
- 226
- Reaction score
- 1
- Points
- 1
PROBLEM
HANG
Nag-Install lang daw siya ng Custom Rom at pagkatapos nag-hang na.
TOOLS
PROCEDURES:
Code:
MTK Android (Sp flash tool ) tutorial
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing the whole ROM
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds†and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING SUCCESS
DONE
FOR REFERRENCE ONLY.