- Joined
- Feb 1, 2017
- Messages
- 110
Action : Format UserData.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Phone not detected, aborting!!!!
Get port fail.
Please reconnect phone again and retry!
Battery must be charged.
Drivers must be installed.
Boot Fail.!!!.
All done.
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM263)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM264)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
ito file na ginamit ko:http://www.mediafire.com/file/89xkvftgub45joy/homer3706_CLOUDFONE_THRILL_BOOTS2_DA.7z:D:D:D:D dl nyo lang to at extract nyo tapos opin nyo nck crack nyo punta kayo sa setting at select custom loader ilagay nyo don yung file na na dl nyo tapos click frp remove done na yan pwedi nang mag sana makatulong tong post ko mga ka ant
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Phone not detected, aborting!!!!
Get port fail.
Please reconnect phone again and retry!
Battery must be charged.
Drivers must be installed.
Boot Fail.!!!.
All done.
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM263)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM264)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
ito file na ginamit ko:http://www.mediafire.com/file/89xkvftgub45joy/homer3706_CLOUDFONE_THRILL_BOOTS2_DA.7z:D:D:D:D dl nyo lang to at extract nyo tapos opin nyo nck crack nyo punta kayo sa setting at select custom loader ilagay nyo don yung file na na dl nyo tapos click frp remove done na yan pwedi nang mag sana makatulong tong post ko mga ka ant
