puppet26
Registered
- Joined
- Nov 13, 2014
- Messages
- 192
- Reaction score
- 5
- Points
- 1
Share ko lang boss itong ginawa kong Cherry mobile flare Lite. Privacy protection password problem.
Di kaya ng hard reset at walang box . Buti kaya naman sa mga free software na mahahanap sa google.
ito po mga ginamit ko baka sakaling makatulong
Download FIRMWARE here : filesystem:https://mega.co.nz/persistent/mega/jgVVjCQL
Download FLASHTOOL here: http://www.4shared.com/rar/T5XnkrV-ba/SP_Flash_Tool_3135201__5135201.html
download MOBILE UNCLE TOOL here : http://www.4shared.com/mobile/3KI6bDA8ce/mobileuncle_MTK_toolv299.html
To fix invalid imei after flashing pwede po natin gawin ito.
Use mobile uncle tools o kaya sundin lang sumusunod na instruction.
-Open dialer and dial *#*#3646633#*#* (Engineer Mode
-Go to Connectivity Tab and Select CDS information>Radio Information then select 'Phone1' (for the first IMEI)
-At the top, there is a command line, just type there AT +EGMR=1,7,â€xxxxxxxxxxxxxxx″ (Put your first 15 digit IMEI# on 'x'es, check phone box or at the back of your phone under battery for imei)
Hit 'SEND AT COMMAND' and you will probobly get a confirmation that says"AT command is mSent".
Now go back and select “Phone2″ (for the second IMEI#)
- At the top, there is a command line, just type there AT +EGMR=1,10,â€xxxxxxxxxxxxxxx″ (Put your second 15 digit IMEI# on 'x'es.)
-Hit 'SEND AT COMMAND' and you will probobly get also another confirmation that says"AT command is mSent".
-Reboot your phone and check you IMEInumber (Dial *#06#).
Pasensiya na sa post kung hindi masyado malinaw or may kulang. Tanong na lang po kung may di naintindihan..
Di kaya ng hard reset at walang box . Buti kaya naman sa mga free software na mahahanap sa google.
ito po mga ginamit ko baka sakaling makatulong
Download FIRMWARE here : filesystem:https://mega.co.nz/persistent/mega/jgVVjCQL
Download FLASHTOOL here: http://www.4shared.com/rar/T5XnkrV-ba/SP_Flash_Tool_3135201__5135201.html
download MOBILE UNCLE TOOL here : http://www.4shared.com/mobile/3KI6bDA8ce/mobileuncle_MTK_toolv299.html
To fix invalid imei after flashing pwede po natin gawin ito.
Use mobile uncle tools o kaya sundin lang sumusunod na instruction.
-Open dialer and dial *#*#3646633#*#* (Engineer Mode
-Go to Connectivity Tab and Select CDS information>Radio Information then select 'Phone1' (for the first IMEI)
-At the top, there is a command line, just type there AT +EGMR=1,7,â€xxxxxxxxxxxxxxx″ (Put your first 15 digit IMEI# on 'x'es, check phone box or at the back of your phone under battery for imei)
Hit 'SEND AT COMMAND' and you will probobly get a confirmation that says"AT command is mSent".
Now go back and select “Phone2″ (for the second IMEI#)
- At the top, there is a command line, just type there AT +EGMR=1,10,â€xxxxxxxxxxxxxxx″ (Put your second 15 digit IMEI# on 'x'es.)
-Hit 'SEND AT COMMAND' and you will probobly get also another confirmation that says"AT command is mSent".
-Reboot your phone and check you IMEInumber (Dial *#06#).
Pasensiya na sa post kung hindi masyado malinaw or may kulang. Tanong na lang po kung may di naintindihan..
