dogtrax2k
Registered
CM flare S3 Octa. dead done sa NCKcrack daing thread dito pro si google padin ang nag bigay hahaha...
ito po tryu nyo baga magamit ninyo po rin ito: CM_Flare S3 Octa baka makatulong din po


BOOT INFO Select BaseBand CPU :MT6592
Flash files count is :12
Action : Firmware update.
Selected 0-By CPU: MT6592
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513758534142
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010051375853 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
salamat sa pag view kahit maraming nkagawa na share padin ng share .....
sana makdagadag sa may na ngangaylangan

ito po tryu nyo baga magamit ninyo po rin ito: CM_Flare S3 Octa baka makatulong din po



ito naman po NCK CRACK
ito po SS
BOOT INFO Select BaseBand CPU :MT6592
Flash files count is :12
Action : Firmware update.
Selected 0-By CPU: MT6592
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513758534142
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010051375853 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
salamat sa pag view kahit maraming nkagawa na share padin ng share .....
sana makdagadag sa may na ngangaylangan


Last edited by a moderator: