CM J2 v2.0 Tulala done.... NCKcrack

[dogtrax2k]

CherryMobile flare J2 hang sa logo done gamit ko po NCK CRACK salamt po sa thread ni CyberSlave succes
ito po link.
http://antgsm.com/showthread.php?t=127371&highlight=cherry+mobile+j2
.
p.m nalang po sa tatsulok yung pass

ito hang sa logo...

ITO PO open NCKcrack boot info 1st

Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.

Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6580
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM23)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.
​

ito SS po

Maraming sa lamat sa mga ka ANTgsm good vibes po.... sana makatulong.... at kay ModTeam AGS
Hit tnx bago triangle =))=))=))

 

[darkwizard]

BLEADTECH

IDOL SAN PO LINK NG NCK CRAK PO??

 

[djarchie]

gALING NI CRACKY

 

[dogtrax2k]

BLEADTECH

IDOL SAN PO LINK NG NCK CRAK PO??

ito sir pasok po NCKcrack off muna anti virus sir=))=))=))

 

[nel03]

pa pm ako master ng pass mu tia

 

[evt_mabalacat]

Salamat sa suporta mo sa ating tahanan pagpatuloy mo lang ang pagbabahagi ng iyong karunungan para lalo ka pang madaming matulungan more power sa iyo lodi