SMARTFONE
Registered
- Joined
- Oct 21, 2014
- Messages
- 95
- Reaction score
- 5
- Points
- 1
CM-S100 DeadBoot,Flash Write Error Done ATF jTag.
For Reference lang po...
Unit:Flare S100
Problem: DeadBoot/Flash error
Tool's
ATF jTag
Micro usb cable
eMMC adaptop/TP
ERROR
Alog FLASH IC flash un nagtuloytuloy na magkape muna dahil maykatagalan sa pagrestore...



For Reference lang po...
Unit:Flare S100
Problem: DeadBoot/Flash error
Tool's
ATF jTag
Micro usb cable
eMMC adaptop/TP
ERROR
Code:
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...90014A2058494E594815A16558BDBF78
Flash Description: Hynix XINYH, 3.61 GiB, SN A16558BD, Nov 2012
Partition Config: Boot from USER, Boot ACK OFF (0x38)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (91430 Op/Sec)
Restoring Partition #1...[B][SIZE="4"][COLOR="DarkOrange"]Flash Write Error at 0x001A0000, DCC Read Error,[/COLOR][/SIZE][/B] Timeout During Operation!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 11/26/2013 11:00:00 AM
Alog FLASH IC flash un nagtuloytuloy na magkape muna dahil maykatagalan sa pagrestore...
Code:
Initializing Device...OK
Detecting eMMC #1 ID...90014A2058494E594815A16558BDBF78
Flash Description: Hynix XINYH, 3.61 GiB, SN A16558BD, Nov 2012
Partition Config: Boot from USER, Boot ACK OFF (0x38)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (91430 Op/Sec)
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Completed in 0h 52m 44s. Code Download Speed 215 KiB/sec.
Full Factory Restore Done!
Warning: IMEI1 and IMEI2 has been Changed!
============================================================================
1. Remove JTAG Connection and Assemble Phone
2. Enter Recovery: Press Volume Up + Power Buttons until LCD Becomes RED
3. Select "wipe data/factory reset"
4. Select "Yes -- delete all user data"
5. Select "reboot system now"
6. Wait for 3-5 minutes while Phone is Performing Initial Boot Sequence
7. After Phone starts up, you may need to format Internal SD Card
8. Restore Original IMEI1 and IMEI2 by following intructions here:
www.advance-box.com/tmp/cherry_imei.php



