- Joined
- Nov 22, 2016
- Messages
- 374
Android info:
Problem: Hang then restart tapos red batt. lang
History:Hang ang unit pero sabi ni tomer water damage daw,so tester ko muna ayon ok pa unit[may pag-asa pa] sa loob loob ko
kaso di madetect sa PC so terster ko ulit sa usb port nya ayon putol yong isang positive sa charging pin so jumper nalang,ok na detected na sa PC
DL na ng FW dito sa tahanan so Flash ko kaagad sa SPTools kaso may Error ng PMT error,na tapos DEADS na yong unit
nakaka 4 na ko ng FW same parin,so idecided to flash sa miracle box ayon sapul po sya.
Procedure:
Open Miracle shell,MTK Tab>Service>write
Boot Select: 8th Boot,then browse scatter file>START BUTTON
off unit>insert USB
wait ti'l it's DONE!!!
Result
Opsss...di pa tapos napansin ko Unknown Baseband
Solution: Reset lang para bumalik baseband
Go to Setting's then Factory Reset
kala ko tapos na pag dial ko ng *#06#
solution: NCK lang po katapat
Result
Scatterfile from CM2 Backup
MT6582__Cherry_Mobile__Q800__Q800__4.4.2__ALPS.KK1.MP1.V2.11
Bin File use Miracle Box
CM URBAN MTK6582 [binfile]_rexelens
Thanks for viewing
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Cherry Mobile
Device Model : Q800
Device CPU : MT6582
Device IntName : Q800
Device Version : 4.4.2
Device Compile : 4/15/2014 9:33:56 AM
Device Project : ALPS.KK1.MP1.V2.11
Device ExtInfo : Q800

Problem: Hang then restart tapos red batt. lang

History:Hang ang unit pero sabi ni tomer water damage daw,so tester ko muna ayon ok pa unit[may pag-asa pa] sa loob loob ko
kaso di madetect sa PC so terster ko ulit sa usb port nya ayon putol yong isang positive sa charging pin so jumper nalang,ok na detected na sa PC
DL na ng FW dito sa tahanan so Flash ko kaagad sa SPTools kaso may Error ng PMT error,na tapos DEADS na yong unit
nakaka 4 na ko ng FW same parin,so idecided to flash sa miracle box ayon sapul po sya.
Procedure:
Open Miracle shell,MTK Tab>Service>write
Boot Select: 8th Boot,then browse scatter file>START BUTTON
off unit>insert USB
wait ti'l it's DONE!!!

Result


Opsss...di pa tapos napansin ko Unknown Baseband

Solution: Reset lang para bumalik baseband
Go to Setting's then Factory Reset
kala ko tapos na pag dial ko ng *#06#

solution: NCK lang po katapat

Result

Scatterfile from CM2 Backup
MT6582__Cherry_Mobile__Q800__Q800__4.4.2__ALPS.KK1.MP1.V2.11
Bin File use Miracle Box
CM URBAN MTK6582 [binfile]_rexelens
Thanks for viewing
Last edited by a moderator: