CM2 - SPD FRP/PASSWORD/F.Reset (For Beginner)

Berdugo · Feb 10, 2017

How to Use CM2 - Beginner Mode:

Password/FRP/Factory Reset

Step 1.

Step 2.

Step 3.

Finish:
NOTE: INTAYIN HANGGANG MAG APPEAR ANG LOGO (Sabi ni CM2)

DONE:

Card found: S/N : AAC53A8F , v0134
Chinese Miracle II [SPD module] v 1.24

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Loading : Cherry_Flare_S3_MINI_Q620.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Cherry_Flare_S3_MINI_Q620_V01_20150211
FastCheck : 0x002C6AD481

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : h620_d1bom_nvitem_W15.06_20150207.bin
File : nvitem_wcn_MOCORTM_SC7731_14B_W15.06.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_normal.bmp
File : logo_fastboot.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!

Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000000AE2FB000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

noecagomoc · Feb 17, 2017

May crack po kayo niyan?

ZOCHRALSKI · Feb 17, 2017

ayon si idol

______________________
isa puso mo lang ang pagtira sa tahanang ANTGSM

Facebook Account : https://web.facebook.com/zochralski.baritua.9

My Number : 09232771556

MKC333 · Feb 17, 2017

salamt boz sa pagbahagi

vherhel19 · Feb 17, 2017

tnx po sa pag share boss.

dr_gadget · Mar 11, 2017

cliveraine05 said:
How to Use CM2 - Beginner Mode:

Password/FRP/Factory Reset

Step 1.

Step 2.

Step 3.

Finish:
NOTE: INTAYIN HANGGANG MAG APPEAR ANG LOGO (Sabi ni CM2)

DONE:

Card found: S/N : AAC53A8F , v0134
Chinese Miracle II [SPD module] v 1.24

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!

Loading : Cherry_Flare_S3_MINI_Q620.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Cherry_Flare_S3_MINI_Q620_V01_20150211
FastCheck : 0x002C6AD481

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : h620_d1bom_nvitem_W15.06_20150207.bin
File : nvitem_wcn_MOCORTM_SC7731_14B_W15.06.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_normal.bmp
File : logo_fastboot.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!

Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 20 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000000AE2FB000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

kaylang poba backup muna tapos lalagay ang firmware o mag download ng bagong firmware

jadezkey · Mar 11, 2017

nicesharing boss

lakay30 · Mar 11, 2017

nice boss

francisjohn · Mar 11, 2017

salamat dito bossing

meerlgsm · Mar 11, 2017

dr_gadget said:
kaylang poba backup muna tapos lalagay ang firmware o mag download ng bagong firmware

Eto magandang tanong na kailangang masagot ni boss cliveraine05

lasister · Mar 11, 2017

boss tanong lang po kelangan po bang lagyan ng firmware pasensya baguhan lang po

julz35 · Mar 18, 2017

pa-link ng crack boss..tnx

ZOCHRALSKI · Mar 18, 2017

good day

lasister said:
boss tanong lang po kelangan po bang lagyan ng firmware pasensya baguhan lang po

ikaw ba ay Legit na Tech sir?

______________________
isa puso mo lang ang pagtira sa tahanang ANTGSM
Facebook Account : https://web.facebook.com/zochralski.baritua.9
My Number : 09232771557

sen · Mar 19, 2017

Boss pahingi po link.Tnx

CM2 - SPD FRP/PASSWORD/F.Reset (For Beginner)

Berdugo

Registered

noecagomoc

Registered

ZOCHRALSKI

Registered

MKC333

Premium 2024

vherhel19

Premium 2024

dr_gadget

Registered

jadezkey

Registered

lakay30

Registered

francisjohn

Registered

meerlgsm

Premium Account

lasister

Premium Account

julz35

Registered

ZOCHRALSKI

Registered

sen

Registered