DOWNLOAD Dingding defi phantom HANG ON LOGO DONE

[alexan]

Dingdingdefi phantom


PROBLEM: TULALA LANG SA LOGO
kapol sa firmware ni boss TM arckhee

http://antgsm.com/showthread.php?t=157176


ito ang patunay

Card found: S/N : 9C981647 , v0136
Chinese Miracle II  [SPD module] v 1.24

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_qhd_oversea
Model Brand : Dingding
Model Device: sp7731c_c7367_qhd
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720
Model Ext   : Defi_Phantom

[Read Mode] : HSUSB : 0x1000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1927 MiB
Saved to : C:\Users\TEMP.alexancellphone.005\Desktop\SP7731CEB_sp7731c_c7367_qhd_6.0_C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720_Defi_Phantom\
Done!

Elapsed: 00:10:25

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000000673F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:28

Reconnect Power/Cable!


Infinity SC Firmware Detected
FW Size : 1927 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Dingding
Device Model   : sp7731c_c7367_qhd
Device CPU     : sp7731ceb
Device IntName : sp7731c_c7367_qhd_oversea
Device Version : 6.0
Device Compile : 7/20/2017 2:16:31 PM
Device Project : C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720
Device ExtInfo : Defi_Phantom


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!

Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ... 
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : logo_540x960.bin
Write Data ... 
Write Data Ok!

Write CodeData : fblogo_540x960.bin
Write Data ... 
Write Data Ok!

Write CodeData : boot.img
Write Data ... 
Write Data Ok!

Write FSImage : system.img
Write Data ... 
Write Data Ok!

Erase Block : PERSIST
Erase block ... 
Block erase Ok!

Write FSImage : cache.img
Write Data ... 
Write Data Ok!

Write CodeData : recovery.img
Write Data ... 
Write Data Ok!

Erase Block : MISC
Erase block ... 
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ... 
Write Data Ok!

Write FSImage : userdata.img
Write Data ... 
Write Data Ok!


Elapsed: 00:04:06

Reconnect Power/Cable!

ayan buhay na at kumpleto may imei din yan


pic info:

bilang pasasalamat at ginanahan ako..
convert ko na rin sa pac file.. baka kc kailangan nyo. paki beta test nalang po

firmware ba..? click mo lang ang mahal nating tahanan
file converted to pac file
antgsm.com

password protected
use triangle for pass


oh ito na rin ang tools
spd flash tool
​

we love to sharing
we love ANTgsm

​

​

 

[JICE]

salamat dito smod alexan tadtad ng signature ang pic haha

 

[alexan]

salamat dito smod alexan tadtad ng signature ang pic haha

=))=))=))=))=))=))=))=))=))=))
alam mo naman.. alam na alam.. makakawala pa ba yan sa editing para copy paste ang posting

 

[halim sultsn]

master anung password?

 

[alexan]

master anung password?

tumulong ka rin sa tahanan upang ikaw ay tulungan
ang tagal mo na sa tahanan 2016 ka pa ni isang post wala ka..
wag naman palaasa.. tulong din

 

[randy]

mga bozz ppzsword nmn po

 

[alexan]

mga bozz ppzsword nmn po

use tatsulok

 

[orus3b2]

tested nga boss.
kailangan lang nakacheck ang update nvm sa cm2spd kung mgflash dahil kung hindi blanko yong imei.

thanks

 

[macknald2017]

Dingdingdefi phantom


PROBLEM: TULALA LANG SA LOGO
kapol sa firmware ni boss TM arckhee

http://antgsm.com/showthread.php?t=157176


ito ang patunay

Card found: S/N : 9C981647 , v0136
Chinese Miracle II  [SPD module] v 1.24

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_qhd_oversea
Model Brand : Dingding
Model Device: sp7731c_c7367_qhd
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720
Model Ext   : Defi_Phantom

[Read Mode] : HSUSB : 0x1000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1927 MiB
Saved to : C:\Users\TEMP.alexancellphone.005\Desktop\SP7731CEB_sp7731c_c7367_qhd_6.0_C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720_Defi_Phantom\
Done!

Elapsed: 00:10:25

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000000673F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:28

Reconnect Power/Cable!


Infinity SC Firmware Detected
FW Size : 1927 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Dingding
Device Model   : sp7731c_c7367_qhd
Device CPU     : sp7731ceb
Device IntName : sp7731c_c7367_qhd_oversea
Device Version : 6.0
Device Compile : 7/20/2017 2:16:31 PM
Device Project : C7367_HWD_R9_DINGDING_324_QHD_NOGPS_B1_V01.01.B07_20170720
Device ExtInfo : Defi_Phantom


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 69 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!

Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ... 
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
Write Data ... 
Write Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : logo_540x960.bin
Write Data ... 
Write Data Ok!

Write CodeData : fblogo_540x960.bin
Write Data ... 
Write Data Ok!

Write CodeData : boot.img
Write Data ... 
Write Data Ok!

Write FSImage : system.img
Write Data ... 
Write Data Ok!

Erase Block : PERSIST
Erase block ... 
Block erase Ok!

Write FSImage : cache.img
Write Data ... 
Write Data Ok!

Write CodeData : recovery.img
Write Data ... 
Write Data Ok!

Erase Block : MISC
Erase block ... 
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ... 
Write Data Ok!

Write FSImage : userdata.img
Write Data ... 
Write Data Ok!


Elapsed: 00:04:06

Reconnect Power/Cable!

ayan buhay na at kumpleto may imei din yan


pic info:

bilang pasasalamat at ginanahan ako..
convert ko na rin sa pac file.. baka kc kailangan nyo. paki beta test nalang po

firmware ba..? click mo lang ang mahal nating tahanan
file converted to pac file
antgsm.com

password protected
use triangle for pass


oh ito na rin ang tools
spd flash tool
​

we love to sharing
we love ANTgsm

​

​

boss pa share ung pass salamat po

 

[donzky_12345]

salmat dto boss....

 

[JAY_R_1988]

Boss pa pm nmn ng pass salamat

 

[evt_mabalacat]

Salamat sa suporta mo sa ating tahanan pagpatuloy mo lang ang pagbabahagi ng iyong karunungan para lalo ka pang madaming matulungan more power sa iyo lodi

 

[KiD RocK]

maraming salamat boss tested ko nga un lang ung pacfile ginamit ko 101% hehhehe...

 

[abdillah]

sir pasend ng pass natatsulukan ko na po sir

 

[jsultan]

Password po boss

 

[juliaane]

boss, thanks sa pagshare.ano ang password,kailangan talaga...

 

[juliaane]

boss ano ang password nitong pifi phantom

 

[juliaane]

password mga boss...kailangan talaga.

 

[jael1968]

up ko lang boss deadlink na po..Salamat

 

[jael1968]

up ko lang boss..................

 

[jerryleony]

Boss good am ....pwede po pa update ng link ng firmware................salamat po.........