Dotpad C3 Hang logo done sa cm2 W/back up
History:
dinala sa shop logo lang po sia try ko hanap file sa mga forum niga
wala akong ma kita kahit sa google o yt
kaya na isip ko try ko sa cm2 format
nag done naman antay ko baka mag ok a yun sapol
Procedure:
open cm2 mtk ver1.58 kong wala download ka dito ohh CM2 Download link
go to settings CPU/Platform/Workmode SP : AUTO 2nd option
go to Service click format all
an tayin mo lang
ito yung back up file ko Download here Password : antgsmjulay20
silip mo lang sa baba yung info ng file kong parihas ba sila
ito log's :
Card found : S/N : 6CB042B6 , v0148
Chinese Miracle II [MTK module] v 1.58
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A25F604205
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A25F604205
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x14E676A456895EDD24715BC6B1738F3D
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!
Done!
Elapsed: 00:01:02
Reconnect Power/Cable!
tapos ito back up info:
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A25F604205
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A25F604205
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x14E676A456895EDD24715BC6B1738F3D
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : O1
ProdName : C3
ProdModel : C3
Device : DOTPAD
AndroidVer: 9.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_zechin6580.we.m_P69
[Read Ok] : preloader_zechin6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / zechin6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1517 MiB
Scatter saved to : C:\Users\ESPEKIKAY\Music\MT6580__O1__C3__DOTPAD__9.0__alps-mp-m0.mp1-V2.34_zechin6580.we.m_P69\
All done!
Done!
Elapsed: 00:07:54
Reconnect Power/Cable!
ito na unit
sana maka tolong
History:
dinala sa shop logo lang po sia try ko hanap file sa mga forum niga
wala akong ma kita kahit sa google o yt
kaya na isip ko try ko sa cm2 format
nag done naman antay ko baka mag ok a yun sapol
Procedure:
open cm2 mtk ver1.58 kong wala download ka dito ohh CM2 Download link
go to settings CPU/Platform/Workmode SP : AUTO 2nd option
go to Service click format all
an tayin mo lang
ito yung back up file ko Download here Password : antgsmjulay20
silip mo lang sa baba yung info ng file kong parihas ba sila
ito log's :
Card found : S/N : 6CB042B6 , v0148
Chinese Miracle II [MTK module] v 1.58
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A25F604205
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A25F604205
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x14E676A456895EDD24715BC6B1738F3D
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!
Done!
Elapsed: 00:01:02
Reconnect Power/Cable!
tapos ito back up info:
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473464040502A25F604205
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d4GA
[eMMC] : FLASH_CID : 90014A4841473464040502A25F604205
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x14E676A456895EDD24715BC6B1738F3D
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : O1
ProdName : C3
ProdModel : C3
Device : DOTPAD
AndroidVer: 9.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_zechin6580.we.m_P69
[Read Ok] : preloader_zechin6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / zechin6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1517 MiB
Scatter saved to : C:\Users\ESPEKIKAY\Music\MT6580__O1__C3__DOTPAD__9.0__alps-mp-m0.mp1-V2.34_zechin6580.we.m_P69\
All done!
Done!
Elapsed: 00:07:54
Reconnect Power/Cable!
ito na unit
sana maka tolong
godbles...
