REFERENCE DOWNLOAD MEDIAPAD S7-301U FLASH FILE

[jeff3]

Huawei Mediapad S7-301u Official Firmware Update



DOWNLOAD MEDIAPAD S7-301U FLASH FILE

File Name	HUAWEI_S7-301u_ FIRMWARE_Android4.0 _C232B005_General_ Channel_05010YBX.zip
Size	221 MB
State	Stock
Firmware	Download

File Name	S7-301u_V100R002 C002B008_ROOT.zip
Size	328 MB
State	Rooted
Firmware	Download

HOW TO FLASH MEDIAPAD S7-301U FIRMWARE
In order to install the firmware on your Mediapad S7-301u, you need:

• SD card
• Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
• Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
2. Reboot tablet;
3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.