- Joined
- May 18, 2017
- Messages
- 2,057
- Reaction score
- 76
- Points
- 381
- Location
- Mandaluyong City / Malolos City
Always Follow These Steps.You Can Find Your Problems Easily...
This Steps are Called "ELS"
E - Entry
L - Level
S - Service or Scanning
For Hardware:
Must Check Before Asking Any Help.
1. Must open the device.
2. Check Full PCB (FULL SCAN) Open the Shields Also (if Needed).
3. Check for any Missing,Water Damaged,Broken,Burned Components.
4. Check for Short or Heating Components.
5.Always ask the Customer (Most Important)
Water Damage...?
Dropped Down...?
Short Circuit...?
Used Local Charger...?
For Software:-
1. Check For Short first.
2. Check Battery Connector and Usb Connector.
3. Always Flash the device with more then 50% Charged Battery.
4. Always use Original Battery for flashing.
5. Always use Good Quality USB Cable for flashing.
6. Always use Original Tools or Flashing Devices.
7. Use cracks tools with your own risk (but some cracked tools work)
This Steps are Called "ELS"
E - Entry
L - Level
S - Service or Scanning
For Hardware:
Must Check Before Asking Any Help.
1. Must open the device.
2. Check Full PCB (FULL SCAN) Open the Shields Also (if Needed).
3. Check for any Missing,Water Damaged,Broken,Burned Components.
4. Check for Short or Heating Components.
5.Always ask the Customer (Most Important)
Water Damage...?
Dropped Down...?
Short Circuit...?
Used Local Charger...?
For Software:-
1. Check For Short first.
2. Check Battery Connector and Usb Connector.
3. Always Flash the device with more then 50% Charged Battery.
4. Always use Original Battery for flashing.
5. Always use Good Quality USB Cable for flashing.
6. Always use Original Tools or Flashing Devices.
7. Use cracks tools with your own risk (but some cracked tools work)
Last edited by a moderator:
