What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Easy Jtag i9300 - done

Berdugo

Berdugo

Registered
Joined
Oct 30, 2014
Messages
1,127
Reaction score
19
Points
181
REFFERENCE ONLY

9ZXRdu1.jpg


hl1IS2v.png


EasyJtag Suite Classic ver.: 2.5.0.3 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7600), 64-bit edition. Admin rights FAIL
undefined
Android Explorer ver.: 1.0.0.19
eMMC ODIN ver.: 1.0.11.10
Successfully connected to box on COM5
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA76-C170 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED


Z3X EasyJtag Software ver. 2.5.0.3

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:752 mV
CMD Active Level:2217 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 15010056545530304DF11F4D0BA36F3A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 525142947
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU00M_ 525142947_20170113_1812.extcsd
Done.
 
Full logs

EasyJtag Suite Classic ver.: 2.5.0.3 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7600), 64-bit edition. Admin rights FAIL
undefined
Android Explorer ver.: 1.0.0.19
eMMC ODIN ver.: 1.0.11.10
Successfully connected to box on COM5
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA76-C170 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED


Z3X EasyJtag Software ver. 2.5.0.3

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 15010056545530304DF11F4D0BA36F3A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 525142947
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU00M_ 525142947_20170114_0008.extcsd
Done.

Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.

Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.

extCSD file...C:\Users\BackUp\Desktop\VTU00M_ 525142947_20170113_2348.extcsd

Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing...
Done.

Checking NAND Image : C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM2_00000000_00200000.bin
File successefuly loaded!

Processing file...C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM2_00000000_00200000.bin
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Input file : C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM2_00000000_00200000.bin
Writing 0000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 1010 kB/s

Checking NAND Image : C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM1_00000000_20000000.bin
File successefuly loaded!

Processing file...C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM1_00000000_20000000.bin
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2237 mV
Input file : C:\Users\BackUp\Desktop\Z3X - Easy Jtag\Direct EMMC\i9300\Dump i9300\EMMC_ROM1_00000000_20000000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 2525 kB/s

Z3X EasyJtag Software ver. 2.5.0.3

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:752 mV
CMD Active Level:2248 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 15010056545530304DF11F4D0BA36F3A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 525142947
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU00M_ 525142947_20170114_0015.extcsd
Done.

Running:Change BOOT CONFIG...
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2248 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing eMMC Register...
Written: REG : 179 VAL :48
Done.

Running:Change BOOT WIDTH...
Z3X EasyJtag Software ver. 2.5.0.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:752 mV
CMD Active Level:2248 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing eMMC Register...
Written: REG : 177 VAL :1
Done.

Z3X EasyJtag Software ver. 2.5.0.3

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:752 mV
CMD Active Level:2248 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 15010056545530304DF11F4D0BA36F3A
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xF1
EMMC NAME: VTU00M , S/N: 525142947
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU00M_ 525142947_20170114_0016.extcsd
Done.
 
Strong wire connection gamit mo sa 1.8 at 3.3 volts? ganun din ba sa CLK boss?

ito gamit ko kasi adapter..mas gamay kong gamitin ;))

 
bossing baka wede naman makahingi ng tamang pin out ng emmc kamuka kasi ng adapter ko yang sayo kaso dhirap naman pakonekin salamat mode sana pashare ng pin out moh sa.... jtag-isp adapter mo ...thanks
 
You must log in or register to reply here.
Back
Top