DOWNLOAD ESP32-C3 Supermini Flasher for Wifi FRP-Portal

[androford10]

Lahat ng naka subscribe sa ating APK Pop-up Virus Remover is may free kayo dito
just buy kayo nito sa shopee
then contact nyo lang ako.
or post hwid sa comments

ito po ang ESP32 Flasher natin.

send HWID para malagyan natin ng credit sa loob

dapat yung may c3 na label kasi may roong fake nito yung walang label na c3


https://www.mediafire.com/file/av8c4lfrd24zxd8/ESP32+Flasher.zip/file

pwede magamit ang Apk Pop up Virus Remover natin
open debloater makikita diyan kung anong gusto mong e open via FRP Portal natin.
For tecno, infinix at itel pwede siya magamit pang enable usb debugging then gamit ang remove frp ng apk pop up virus remover natin.

 

[Meganadz]

Sayang naman gusto ko sana bumili niyan, Kaso Desktop at laptop ko puro sira. Bibili na lang ulit ng bago

 

[androford10]

now added supprt for ESP32 (ESP32-D0WD-V3)

 

[Jm'Romulo]

474773484B8EA83E pa try bossing

 

[FredzyNoy]

now added supprt for ESP32 (ESP32-D0WD-V3)
View attachment 41765
View attachment 41766

View attachment 41767

salamat paps

 

[androford10]

n

salamat paps
View attachment 41769

under beta test pa paps if may problem just post here para ma update ko. If hindi maka connect try other firmware pag tested na talaga lagyan ko indicator na stable sa flasher ko. thanks

 

[triske198]

52F15759615C9A29

 

[Meganadz]

now added supprt for ESP32 (ESP32-D0WD-V3)
View attachment 41765
View attachment 41766

View attachment 41767

Ang lakas nito for sure

 

[androford10]

Ang lakas nito for sure

maganda lang sya para sa itel, tecno at infinix. yung ibang higher android version hinahanapan ko pa ng paraan di kasi maka pasok sa portal.

 

[androford10]

tecno frp done via esp32 dial enable adb and apk pop-up virus remover

 

[Meganadz]

maganda lang sya para sa itel, tecno at infinix. yung ibang higher android version hinahanapan ko pa ng paraan di kasi maka pasok sa portal.

Kaya mo yan boss. Ikaw pa

 

[androford10]

https://www.mediafire.com/file/e2dleleexr219v1/ESP32+Flasher.7z/file latest link

 

[androford10]

https://zadig.akeo.ie/
When the ESP32-C3 appears only under Universal Serial Bus controllers (as "USB JTAG/serial debug unit") instead of Ports (COM & LPT) in Windows Device Manager, it indicates a driver configuration issue or disabled USB CDC settings. To resolve this, apply the following fixes:Update Driver via Zadig: Download and run Zadig. Select Options > List All Devices, find the USB JTAG/serial debug unit, and replace its driver with USB Serial (CDC).Enable USB CDC in IDE: In the Arduino IDE, navigate to Tools > USB CDC On Boot > Enabled. This configures the board to emulate a serial port on startup.Enter Boot Mode: If the board is not detected at all, hold the BOOT button, press and release RST, then release BOOT to force download mode and allow driver reinstallation.Verify Board Selection: Ensure the correct board (e.g., XIAO ESP32C3 or ESP32-C3 Dev Module) is selected, as some variants require specific pin mappings for native USB to function correctly.