Experia E10i unlocked by Medusa

[BLIND]

Experia E10i unlocked by Medusa

Tool used : Medusa box and jtag-clip with soldered wires from rj45 cable...

Procedure:

1. Open Medusa Box Software
2. Select Advanced tab
3. Choose the model to be unlocked (click help to Check the pin-out connection)
4. Press connect (info will appear) ..then press unlock



Welcome to Medusa Box Software version 1.2.4.1
Selected device model: Sony Ericsson E10i
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Detected Core ID: 203C00E1
CPU : Qualcomm MSM7227
Core ID : 203C00E1
Flash device: ST 512Mb
Flash ID : 000020BC
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Connect successful.
Opening "C:\Program Files\GsmServer\Medusa\BACKUP\Sony Ericsson E10i Boot 31-10-2011 11_59_22.bin" file...
Reading BOOT section. Please wait... Done
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson E10i TA Backup 31-10-2011 11_59_48.mf".
Unlocking. Please wait... Done