experia x10 lock from roger unlocked by medusa

[BLIND]

experia x10 lock from roger unlocked by medusa

heres a procedure
-hinangin po ang pinout
-kunin ang medusa at saksak
-select advance mode
-click conect hanggang sa matpos madetech ng software
-click unlocked

ito ang log

Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Detected Core ID: 1BA000E1
Detected Core ID: 202400E1
ERROR[000]: Unable to halt core.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Detected Core ID: 1BA000E1
Detected Core ID: 202400E1
ERROR[000]: Unable to halt core.
Detected Core ID: 1BA000E1
Detected Core ID: 202400E1
ERROR[032]: Target device Core has disabled JTAG/EmbeddedICE.
ERROR[000]: Unable to halt core.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Detected Core ID: 1BA000E1
Detected Core ID: 202400E1
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Micron 1024Mb
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
Connect successful.
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson XPERIA X10 TA Backup 20-09-2011 13_34_46.mf".
Unlocking. Please wait... Done

​