f1s a1601 after flash dead... help

[jevy]

mga boss baka meron kayo links jan mga boss, ang una problema nito pattern, nag error sa cm2 mtk, hnd naman ma back up dahil, napilitan ko i flash to, after flash dead pero vibrate lang, pa help naman mga boss may sakit pa sa puso ang may ari kasi matanda na pleaseeeee ((

 

[xspeices09]

e2 boss oh flashfile galing kay boss julay http://antgsm.com/showthread.php?t=144043&highlight=oppo+f1s+1601

 

[jevy]

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:28
Reconnect Power/Cable!


Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from ScatFW!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM46H
[eMMC] : FLASH_CID : 150100524836344D42021DDCDADD14FF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID : 0xD8DB27F18027DAA1BFCB1A36D9833D46
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : oppo6750_15131 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000003F80000
Erase : 0x0000000004088000-0x0000000004000000
Erase : 0x0000000009800000-0x0000000001000000
Erase : 0x000000000AB00000-0x0000000002400000
Erase : 0x000000000D400000-0x00000007397FBE00
Flash Erase Done, time used : 00:00:02

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Something wrong with files or connection!

Operation Failed
Elapsed: 00:00:37
Reconnect Power/Cable!

 

[jevy]

try ko boss pag ok feed ko..

 

[henryboy14]

bka ibang mtk chip like mt6755 at meron ding mtk6750
...advice mga bossing b4 tau mgflash iwas dead read info muna
para macheck kung anung mtk xa
..maraming na dead jan dahil flash agad

 

[chezzter]

try mo i flash sa cm2mt v2

 

[muzav_umayr]

ibang version yan ang nagamit mu firmware boss,,identify munu ang info ng phone sa cm2..
tapus hanapan mu ng saktung firmware,,

 

[jevy]

mtk6750

ito ang wala ako mga boss

 

[jevy]

helppppppppppppppppp

 

[slg_balawis]

Wait lodi

 

[meerlgsm]

Secured boot kase ang unit na yan boss at saka magkaiba ang laki ng mga internal storage
kailangan bago e-flash ay read info muna para sure at factory sign firmware ang kailangan mo

 

[slg_balawis]

https://www.4shared.com/office/N_4e5LaFca/MT6755_Android_scatter.html#

 

[slg_balawis]

https://www.4shared.com/office/N_4e5LaFca/MT6755_Android_scatter.html#

DOWNLOAD MO BOSS TO

 

[lydor23]

lodi flash mo sa nck supported yan dun..tested po yan..download lang ng latest firmware basta scatter file...

 

[jevy]

mga boss hind ma read kasi, pag ni read sa cm2 mtk, error ang lumabas sa baba chip error

 

[jevy]

salamat boss balawis, hnd pwd siya sa mt6755 kasi jan siya na dead...

 

[SNALC15]

wag mung madaliin boss back mu muna bago ka mag flash para walng abreya