F1s password frp at hang logo no need to flash

[lydor23]

1.Load lang ng firmware ng f1s (mag error poh kc pag wala) backup oh download na firmware poh basta same cpu
2.Pwede na poh tau mag read pattern,reset user lock,factory format(unlock not supported pa ata)
3.kung flashing poh.dapat ay tested poh ang gagamiting firmware..

Log info:
Brand : OPPO
ProdName : A1601
ProdModel : A1601
Device : A1601
AndroidVer: 5.1
MTKxCPU : MT6755
MTKxPRJ : A1601EX_11_A.24_161119

info:

Card found : S/N : none
Chinese Miracle II [MTK module] v 1.5


Operation : Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc] [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from IDB!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A40A8664FA63AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xC8773D58228799BD1AE0F24CF14E9D2D
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

USBDL : Init HSUSB Ok
LSSDB Ok!
LSSWL Ok!
LSSSH Ok!
LSSGS Ok!
Security Settings : Clear Ok!

[Info] : That feature NOT RESET "PRIVACY PASSWORD LOCK"! Use separate button!
[Info] : That feature NOT RESET "FRP/GoogleLOCK"! Use separate "FRP" reset!
[Info] : If phone stuck on "Logo" :
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!


Screen shot:

http://s1243.photobucket.com/user/rodyl23/media/1_zpspdbs2lgf.jpg.html


http://s1243.photobucket.com/user/rodyl23/media/Untitled_zpszzs0ttqb.jpg.html

http://s1243.photobucket.com/user/rodyl23/media/IMG_20170112_131837_HDR_zps6pqzlefw.jpg.html


http://s1243.photobucket.com/user/rodyl23/media/IMG_20170112_131916_HDR_zps253iz1gu.jpg.html


http://s1243.photobucket.com/user/rodyl23/media/IMG_20170112_131925_HDR_zpsimlbssz1.jpg.html


http://s1243.photobucket.com/user/rodyl23/media/IMG_20170112_131903_HDR_zpszebviku0.jpg.html

http://s1243.photobucket.com/user/rodyl23/media/IMG_20170112_131946_HDR_zpsmtqwsta2.jpg.html



for reference only...Beta test sa gustong mag try..
Salamat sa pagview,feedback nalang poh.

 

[aginzkie]

salamat dito boss lydor pag may napad pad sken try q yan

 

[SNALC15]

nice boss

 

[lydor23]

salamat dito boss lydor pag may napad pad sken try q yan

nilabas koh na CO para mapakinabangan ng lahat...salamat sa pag view...

 

[lydor23]

nice boss

salamat poh,

 

[LOISAN]

nice boss...

 

[DAFS2017]

tnx sa info..

 

[lydor23]

nice boss...

Salamat poh,feedback nalang...marami naq poh nagawa..na tryq na rin poh mag format all sa logo hang,.

 

[lydor23]

tnx sa info..

walang anuman poh,salamat din poh sa pag view..