What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

DOWNLOAD firefly mobile AURII ENVY black screen

verser09

Registered
Joined
Jan 5, 2016
Messages
446
Reaction score
67
Points
31
Location
Bulacan
conditio: NAka black screen lang sya

sabi ni costumer nag update lang sya after nyang maupdate ayun black screen na,
check ko kung binabasa pa sa computer ok naman so offer ko nlng sya ng program.

<img src="https://image.ibb.co/kSpZEk/auri_envy_2.jpg" alt="auri envy 2" border="0" />

solution: program so back up muna para sure..

READ:
Brand : FIREFLY MOBILE
ProdName : AURII ENVY
ProdModel : AURII ENVY
Device : AURII_ENVY
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_wtk6753.65u.m0


flash ko na sya using tested firmware:
<img src="https://image.ibb.co/fSpZEk/auri_envy_4.jpg" alt="auri envy 4" border="0" />



FLASH SUCCESS:

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D423158D7BC07421B249190
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207BCD79091831B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xBE4195C5B63157B55D5BFF95333224CB
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6753 , Project : x5618_yp_f555a_firefly_5365u , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3826 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000004D80000
Erase : 0x0000000006B00000-0x000000039C280000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_x5618_yp_f555a_firefly_5365u.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0016
Update PMT by user request
[SpecOp] : Extend UserArea
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:03:46

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:09

Update Mirror PMT
[SpecOp] : Extend UserArea
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:12
Reconnect Power/Cable!



ayun bumukas na!!
<img src="https://image.ibb.co/cXpZEk/auri_envy_1.jpg" alt="auri envy 1" border="0" />

ok testing imei good
test camera malinaw
<a href="https://ibb.co/hsd0n5"><img src="https://thumb.ibb.co/hsd0n5/auri_envy_3.jpg" alt="auri envy 3" border="0" /></a>


ok na :D:D:D
DONE


FIRMWARE:

https://mega.nz/#!xMZU1Kxb!cqYEk_ro0_X8xQ5c2HizPPks_b6PPgsHP2AhcET8hhI
pass ilovesign
 
Last edited by a moderator:
Report Private Message Private Message: bossing auri envy
Today, 01:55 PM

akosiyaps

na seng ko na ang password mo
 
boss pa pm po ng password saka pano po i backup ang mga files thank you po
 
Back
Top