Firefly Mobile Aurii Vivid 7.0 Virus Problem Dina Kaya Ereset Reflashing Solve
Procedure>>>>>>>>>>>>>>>>>>>>
NCK Box Or Dongle, Pwede rin CM2 Dongle or SP Flash Tools
Install Driver if wala pa naka-install
Dapat ay may 50 percent or 40 percent ang laman ng battery
Dapat naka-OFF ang unit then Click Flash
then isaksak ang USB na wala na pipindutin na volume button
hintayin lang matapos at kusa na siya mag-charge
Tapos FRP naman ay Click nyo lang ulit Reset FRP
Flash files count is :10
Action : Firmware update.
Selected Model: 0-By CPU: MT6580
Exe version: NCKBox AndroidMTK 1.8.9.7
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM9)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.