What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Flare J3 Lite 7.0 Bootloader Lock Done By CM2 and Brodhorse 1st in All Forum

boss cyberslave ptry din po pg my napadaan atleast meron n. pshare din ng password tia....
 
nid q lang po urgent nag scrabble po kc ung display ng j3 lite ni cos2mer salamat po
 
request

sir help nmn po bka po pwede po mkhangi ng password nid lng po salamat
 
Petmalu ka talaga LODI

3469jjo.jpg
 
boss good pm po pede pa share ng pass maraming salamat

update lang po salamat
 
Boss good pm po makiki share ng pass maraming salamat uli po <<------------------<<<<<
 
maraming salamat boss sa file
7.0 secure boot error BY BRODHORSE&me

done na ang unit wala lang ako screenshot...




Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
 
Yan ang IDOL... pumapalo........

Maraming Salamat sa Pag Share Plee.....
 
maraming salamat boss sa file
7.0 secure boot error BY BRODHORSE&me

done na ang unit wala lang ako screenshot...




Clear FRP ( Google Reset Protection )
Clear Ok!

Done!

pm naman po kung papanu
 
baka pwede makatry niyan mga boss meron kase dito Firefly Mobile Aurii Delight 7.0

ZEWVqwM.jpg


hZmXeG8.png

Chinese Miracle II [MTK module] v 1.58

Start at : [1/16/2018 / 10:47:27 AM]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:04
Reconnect Power/Cable!

Finish at : [1/16/2018 / 10:47:32 AM]

tirahin mo sa nck box swak yan
 
= CyberSlave =

the best ka ,,thank you

[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420126E02732594C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xBB85AF88B5EBCD2354A778E88E889BAB
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!
 
magandang araw po boss pwede po pasuyo ng password...
salamat
 
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642012D2267122A4BB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642012D2267122A4BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xAC32C7D82D7386F42607D398C24D0EBE
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!


tested po talaga mga sir marami pong salamat sa pagbahagi.....credit po kay sir brodhorse at kay boss cyberslave
 
pwede po pa send po ng paswword thanks and more power to you
 
Back
Top