What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Flare J3 Lite & CloudFone Excite Prime 2 Frp [ANSWERED]

= CyberSlave =

Registered
Joined
Jun 12, 2014
Messages
1,091
Reaction score
31
Points
181
Location
Montalban Town Center
Good Day mga bossing..


Sino Po na sa inyo naka encounter o nakapag remove Frp ng dalawang unit na yan? kasi ako parehas ko na natanggap yan sawi ako.. :)) =))

kumbaga lahat ng kaalaman ko sa frp mapa manual box etc... di umubra..

cm2 / nck / mrt / miracle / alladin.. di manlang umubra.. sinubukan ko na din unlock bootlloader pero ayaw failed ng failed...

sa mga naka tanggal na jan baka pwede nyo ma share kung pano at anong gadget gamit nyo?

di ko naman ma flash at wala din firmware ako makita kahit kay uncle wala eh..

salamat
 
Last edited by a moderator:
up up kolang.. angkonat nga dalawa unit nian halos sumakit ulo ko jan..
 
hindi pa kaya yan kahit anong box kung mag firmware sana pwede sa sp flash tool kaso secure boot kaya hindi mabuck-up
 
boss ano po ba cpu ng flare j3 lite at excite prime 2.

ung flare j3 lite boss mtk mt6580. newboot nakalock bootloader

ung cloudfone excite prime 2 mtk mt6737 new din at nakalock din bootloader..

kaya secure boot kapag sa mga box
 
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420258F2D932584A7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420258F2D932584A7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0xAA3896866D4BC58B3E092D05A04A6248
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Cherry_Mobile
ProdName : Flare_J3_Lite
ProdModel : Flare_J3_Lite
Device : Flare_J3_Lite
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : Cherry_H1240_PH_FlareJ3Lite_09182017_V1.7

Done!
Elapsed: 00:00:27
Reconnect Power/Cable!
 
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420258F2D932584A7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420258F2D932584A7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0xAA3896866D4BC58B3E092D05A04A6248
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Cherry_Mobile
ProdName : Flare_J3_Lite
ProdModel : Flare_J3_Lite
Device : Flare_J3_Lite
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : Cherry_H1240_PH_FlareJ3Lite_09182017_V1.7

Done!
Elapsed: 00:00:27
Reconnect Power/Cable!
maraming salamat sa tested file boss okey siya sa CM2 at NCK box
pero sa NCK ko binack-up yung file dahil medyo mas mabilis si NCK
 
GXGDT8n.png


6YgYVLa.png
 
Back
Top