Chinese Miracle II [MTK module] v 1.58
Scatter Load Ok , BaseBand : MT6580 , Project : , Storage : EMMC
Files found : 27 , Set to Flash : 26
Ready to Flash!
Operation : Flash [ v1.58 ]
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 70010054323237303801034EA31093BB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80722
[eMMC] : FLASH_CID : 70010054323237303801034EA31093BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x1F7ED2D74D71D76164EFD8A9ABB7B895
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6580 , Project : , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Only one records found, and determined as universal
BL : eMMC supported by BootLoader!
BL : BatteryLevel : 4097 mV
BL : BatteryLevel Ok
BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000000080000-0x00000001C7F00000
Flash Pre-Erase Done, time used : 00:00:01
SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0019
Update PMT by user request
Repartition Done!
Use FLN Mode
Processing : Flash Write
Flash now : PROINFO
Image Flash Ok
Flash now : NVRAM
Image Flash Ok
Flash now : PROTECT1
Image Flash Ok
Flash now : PROTECT2
Image Flash Ok
Flash now : SECCFG
Image Flash Ok
Flash now : LK
Image Flash Ok
Flash now : LK2
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : PARA
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ODMDTBO
Image Flash Ok
Flash now : EXPDB
Image Flash Ok
Flash now : VENDOR
Image Flash Ok
Flash now : FRP
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : NVDATA
Image Flash Ok
Flash now : METADATA
Image Flash Ok
Flash now : OEMKEYSTORE
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : KEYSTORE
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Write Error , code 0x000! Something went wrong!
Operation Failed
Elapsed: 00:04:54
Reconnect Power/Cable!
