FLARE S3 mini/DEAD....resurrected by CM2

[benart]

Card found: S/N : 78CED61F , v0134
Chinese Miracle II [SPD module] v 1.22

Loading : Cherry_Flare_S3_MINI_Q620.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Cherry_Flare_S3_MINI_Q620_V01_20150211
FastCheck : 0x002C6AD481

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : h620_d1bom_nvitem_W15.06_20150207.bin
File : nvitem_wcn_MOCORTM_SC7731_14B_W15.06.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_normal.bmp
File : logo_fastboot.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!

Operation : Flash [ v1.22 ]

======= Flash
Files set for flashing :
[ MCU ] : Cherry_Flare_S3_MINI_Q620.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Cherry_Flare_S3_MINI_Q620_V01_20150211
File : fdl1.bin
File : fdl2.bin
File : h620_d1bom_nvitem_W15.06_20150207.bin
File : nvitem_wcn_MOCORTM_SC7731_14B_W15.06.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_normal.bmp
File : logo_fastboot.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Device boot not done
Check Drivers
Try again


Reconnect Power/Cable!


Operation : Flash [ v1.22 ]

======= Flash
Files set for flashing :
[ MCU ] : Cherry_Flare_S3_MINI_Q620.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : Cherry_Flare_S3_MINI_Q620_V01_20150211
File : fdl1.bin
File : fdl2.bin
File : h620_d1bom_nvitem_W15.06_20150207.bin
File : nvitem_wcn_MOCORTM_SC7731_14B_W15.06.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_normal.bmp
File : logo_fastboot.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128_MOCORTM_SC7731_14B_W15.06.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2_MOCORTM_SC7731_14B_W15.06.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem_MOCORTM_SC7731_14B_W15.06.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_normal.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : logo_fastboot.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASESD
Current Part : internalsd
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:03:07

Reconnect Power/Cable!