What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Flare S5 Mini Stock on Logo Done Using Research Download - R4.0.0001

aron0820

Registered
Joined
Jul 15, 2016
Messages
140
Reaction score
14
Points
1
Location
san carlos city negros occidental
Cherry Mobile Flare S5 Mini Specs


Display: 4.5 Inch
CPU: 1.2 GHz quad core processor
GPU: TBC
RAM: 512 MB
ROM: 8 GB expandable via micro SD card slot up to 32 GB
Rear Camera: 5 MP w/ LED flash
Selfie Camera: 2 MP
Battery: TBC
OS: Android 6.0 Marshmallow
Connectivity: WiFi, 3G, Bluetooth, dual SIM
Price: PHP 1,899

1.Download the SPD_Upgrade_Tool_R4.0.0001 latest version,Then extract to your desired location.
2.Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe. *NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
3.In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open
4.Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea
5.Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
6.Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
7.After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. - See more at:

DOWNLOAD LINK FOR FIRMWARE :http://www.mediafire.com/file/e7jq7..._Flare_S5_mini_V1.4_11152016_Flare_S5_mini.7z

DOWNLOAD LINK FOR RD:http://www.mediafire.com/file/6i4wmvn8awnkwq7/SPD_Upgrade_Tool_R4.0.0001.zip

dQb2H


TESTED NA PO YAN MGA BOSSING!
 
Last edited by a moderator:
maraming salamat boss..henge nman ng password
 
Good Job Po sir.matesting nga din to pag may naligaw dito sa shop namin.god bless sir.
 
boss, di kokonect usb ko, mag charge lang po siya, paano yun?
 
Back
Top